Application for:
For Mitsubishi Outlander 2.4L 2010-2015
For Mitsubishi Outlander Sports 2.0L 2011-2012
For Mitsubishi RVR 2.0L 2011-2012
Description：
Condition: 100% New and High Quality
Type: Catalytic Converter
Standard: OBD 3 Standard
Emissions: 46-State Legal (Cannot Ship to CA, NY, CO or ME)
Series: 46-State Direct Fit
Product fit: Direct Fit
Restricted States: California, New York, Colorado & Maine
Engine: 2.0L 2.4L
Body Material: Stainless Steel
Tube material: Stainless Steel
Substrate material: Ceramic
Warranty: 1 Year
Fitment Type: Direct Replacement
Placement on Vehicle: Rear
OE Part Number: 10H47095
Package Includes:
1 × Catalytic Converter w/Installation Accessories
Warning:
Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B
( California Air Research Board) approved for use in this state.
Due to New York state emissions regulations, this item cannot be installed on a California emissions equipped vehicle in the state of New York.
All emissions information for a vehicle can be found on a tag under the hood. If the tag is missing, you can contact a dealership with your VIN to determine which emissions system your vehicle is equipped with.
Quality fully guaranteed and professional installation recommended.
Any questions please contact us.
Features:
The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system, which can transform the harmful gases such as CO, HC and NOx discharged from the automobile exhaust into harmless carbon dioxide, water and nitrogen through oxidation and reduction.
Installation:
1. Lift the vehicle so that the chassis is clearly visible.
2. Remove the old three-way catalytic converter and its pipe section.
3. Install new the three-way catalytic converter and smear the bolts with anti-sinter lubricating oil.
4. Start the vehicle and check whether a fault code appears
Q&A:
Q: Can the three-way catalyst directly change the carrier
A: It is very difficult to directly change the carrier, and it is recommended to replace the whole section
Q: How to know whether the three-way catalytic converter can work properly?
A: Check whether there is a fault code after starting the vehicle for a period of time, and pay attention to observe whether there is a fault code during subsequent driving
