Linear Guide Applications: Precise posiioning, dispensing, spray painting, visual inspection, moving,grabbing, cutting and welding, automatic assembly, automatic locking screws, palletizing,etc.
Such as: PCB board detection, optical disc stacking device, parts pick and place.

Features:
Performance Upgrade:200 days of design and development and 100 days of experimental testing for this linear guide product.Anti-corrosion and rust-resistant.
Cost-effective choice:The linear guide embedded with new materials,Use the G1610 ball screw, the effective itinerary is long, which can reach 1000mm,Repeated Position Accuracy ±0.02mm.
Original No Rail Design:Smaller, Thinner, Stronger.The highest position of the linear guide is 47mm.Perfect for tight space applications.Horizontally loadable:20kg,Horizontal Full Load Speed:200mm/s.
Installing Upside Down:Assembling linear guide upside down is fine too.Support flip load 10KG,Meet the needs of special application scenarios.The sliding seat and base are upgraded with M5 screw holes,Make installation easier,Higher locking strength.
Powerful and Quiet Operation:Linear module special made nema 23 stepper motor with max speed up to 1200r/min,Low noise, empty load <65dB, and low -frequency noise.

Specification:
Defalut Stepper Motor Nema 23
Linear Ball Screw Model: G1610
Linear Guide Position Accuracy: ±0.02mm
Effective Stroke: 50-1000mm
Linear Guide Total Length:Stroke+227mm;

Nema 23 Motor Parameter:
Step angle:1.8°
Motor flange size: 57mm
Motor length: 56mm
Holding torque: 0.95 N.m
Current: 2.0A;

General Test Condition:
1. When the module is not activated, the ambient noise equivalent A sound level measured at a distance of 1 meter from the product is 55db;
2. The motor speed does not exceed 1200r/min;
3. The acceleration and deceleration time is 200ms, and the acceleration is constant;
4. There is no obvious abnormal sound and shake during the movement;