Creader 3001 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
Note:
1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.
2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.
3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you.
4.The Scanner doesn't need to charge. You just need to connect to your car OBD2 port.
Specifications:
Screen :1.77 "TFT, 160*128dpi
Voltage Range: 9-18V
Operating Temperature :0℃ -50 ℃ (32 ℉ -122 ℉)
Environment Temperature -20 ℃ -70 ℃ (-4 ℉ -158 ℉)
Dimension: 118mm*68mm*22.3mm(4.65" *2.68 "*0.88")
Weight: <200g
Screen :1.77 "TFT, 160*128dpi
Voltage Range: 9-18V
Operating Temperature :0℃ -50 ℃ (32 ℉ -122 ℉)
Environment Temperature -20 ℃ -70 ℃ (-4 ℉ -158 ℉)
Dimension: 118mm*68mm*22.3mm(4.65" *2.68 "*0.88")
Weight: <200g
Support Full OBD2 functions, Engine Check including:
Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Turn Off ''Check Engine'' Light
Parts might cause your check engine light on include:
1.Gas Cap 2. Oxygen Sensor 3. Air Fuel Ratio Sensor 4. Mass Air Flow Sensor 5. Ignition Coils 6. Spark Plug Wires 7. Spark Plugs 8. Thermostat 9. EGR Valve 10. Evaporatative Emission Canister Purge Valve(EVAP) 11. Catalytic Converter.
If the engine light is not turned off in timeZ:
it will Cause Serious environmental pollution , Increased fuel consumption,Increased engine noise.Increased in temperature , ect
How to verify whether the vehicle will pass the emission test with this code reader?
After entering the I/M Readiness, there will be 10 results on the list. Misfire monitor, fuel system, componentmonitor, catalyst monitor, heated catalyst, EVAP system, secondary air sys, 02 sensor, O2 sensor heater EGRand/or WVT. There will be an OK if each of them works fine. [Not all vehicles have these 10 parts]
Support Language:English , French , Russian , Spanish ,German, Italian ,Portuguese-How to change language
Update
You can go to the launch official website to download and install the update tool, then connect the scan tool to a PC via the USB cable,
Update can ensure you use the newest software.
Freeze Frame Data Viewing
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle.
DTC Lookup
Launch creader 3001 car diagnostic tool built-in OBD-II DTC look-up library, clicking on the error code directly for definition, displaying the error code and its meaning, saving time for you to looking for the meaning of DTC on the internet.
Vehicle Models Coverage
Launch car code reader works on most after 1996 and newer vehicles models in America, European and Asian. It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN.
Need Standard OBD2 Protocols from 2000 to now
for Chrysler, for Ford, for GM, For Jeep ...
European Car:
Need Standard OBD2 Protocols from 2003 to now
For Alfa romeo, for SAAB ,for Acura, for Opel, for Audi for Seat, for Peugeot, for Renault
For Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for VW, for Ford, for Jaguar...
Japanese/Korean Car:
Need Standard OBD2Protocolsfrom 2006 to now
for KIA, for Isuzu, for Honda, for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota...
Chinese Car:
Need Standard OBD2Protocolsfrom 2009 to now
CR3001 Support OBD 2 protocols car:
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
Packing List:
1pcs*LAUNCH CR3001
1pcs*USB Cable
1pcs* manual
On 15-Jul-2024 at 16:38:14 BST, seller added the following information:
On Sep 29, 2026 at 08:59:57 BST, seller added the following information: