Tractor Lower Link Pin with linch pin.

Cat 1 x 4.5/16" useable length, from shoulder to edge of pin hole.

22mm diameter x 110mm useable length.

Please note,  Lower Link Pins are a greater diameter than Top Link Pins. 

Cat 1, 2, 3 or 4 Lower Link Pins are not the same diameter as Cat 1, 2, 3 or 4 Top Link Pins, they are not interchangeable, please measure before you order if you are unsure.

Please note, all linkage pins are standard sizes, Cat 0, 1, 2, 3, or 4, unless stated otherwise,

all measurements are approximate, & are intended as a guide only,