MADE TO MEASURE DAYLIGHT ROLLER BLINDS - 28MM TUBE - MANY COLOURS AND SIZES
Item Features
- This is a custom size product please choose the next available size up from what you require and then give us your specific sizes. If you ask for bigger than you have purchased then we will send maximum sizes paid for.
- Securely fitted to a 28mm strong inner roller tube to provide easy rolling of the fabric. Maximum fabric drop 160cm. The blind can be easily trimmed with a sharp pair of scissors and a hack saw
- Please note: the sizes stated are including our fittings. The width of the actual roller fabric width is approx. 4cm (1 & 1/2 inch) narrower. The technicians will leave excess fabric on the tube to ensure stability.
- Easily fit within minutes and easy to follow instructions along with easy to use pull operation for opening and closing the blind
- Complete with all the fittings, brackets, mounts, and controls. All you need to do is supply a drill
Finer Details
- Metal fitting brackets with plastic covers. Two way fitting so you can have top or face fix, simply choose the appropriate hole in the bracket. Sidewinder operation with child safe tension cord to be fitted at least 1metre off the ground
- Metal roller tube with fabric attached by slotting into the indent. Due to tube indent this may not be suitable for use with other fittings. Please use the fittings supplied
- Supplied with bottom lathe to hold fabric weighted down
- You need at least 10cm depth to fit this blind. Please take care when measuring that protruding handles and dado rails will not interfere with the fabric. You can have the fabric rolled over the tube instead of behind to avoid handles.
- Always leave at least one turn on the roller tube to avoid excess strain on the fabric.