Specifications:
--Model: H4/HB2/9003
--light Source Model: LED Chip,4-side leds,super bright
--Power: 100w/Set & 50w/bulb
--Lumen: 6000LM/bulb
--Operating voltage: DC9-30V
--Beam Type: High beam & Low beam
--Material: Aluminum PCB and PA66+30% GF Plastic
--Beam Angle:360°
--Color Temperature: 6000K-6500K Cool White
--Lifespan:over 50000h
--Working Temperature: -40-+80 Centigrade
--Waterproof rate: IP 67
--Plug for this listing: H4/HB2/9003 Plug High Low Beam LED Headlight Bulbs Kit
--Connector Type:Plug and Play
--Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam
--light Source Model: LED Chip,4-side leds,super bright
--Power: 100w/Set & 50w/bulb
--Lumen: 6000LM/bulb
--Operating voltage: DC9-30V
--Beam Type: High beam & Low beam
--Material: Aluminum PCB and PA66+30% GF Plastic
--Beam Angle:360°
--Color Temperature: 6000K-6500K Cool White
--Lifespan:over 50000h
--Working Temperature: -40-+80 Centigrade
--Waterproof rate: IP 67
--Plug for this listing: H4/HB2/9003 Plug High Low Beam LED Headlight Bulbs Kit
--Connector Type:Plug and Play
--Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam
Features:
--High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;
--High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;
--The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
--There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
--LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
--It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
--LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
Packed Include:
2 x 9003/H4 High Power LED Headlights Bulbs
New and old packaging will be shipped in random.
New and old packaging will be shipped in random.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.