Light source: 5050 RGB LED
IC Model: WS2812b
LED Qty: 30leds 1m / 60leds 1m
Cable length : 50cm
1to2 splitter cable length: 30cm
View angle:120°
Voltage: DC 5V
Waterproof: IP30 Non- waterproof
FPCB board color: Black
Working environment: -40℃ to +80℃
Red wire: 5V+ / Green wire: Data / White Wire: GND
Package
3PIN 4PIN 17 key remote control RGB controller:
**It adopts Molex 4Pin 3PIN interface, compatible with computer motherboard plug, input interface line sequence +5v, DA, GND, input power terminal adopts Molex 4pin interface universal, RF remote control, distance up to 8-25 meters, operation is sensitive and user-friendly, wiring is simple and convenient Support for custom single- and double-line LED driver ICs on the market; with more than 300 kinds of pattern effects, colorful.
**3PIN Controller working voltage: DC 5V
**Current: up to 6A, to control Max 2048 pixels, power input with reverse connection
**The controller will automatically save the user's key settings every time. After the breakpoint, the next time the power-on controller will run according to the original settings.
Product Specifications:
Working temperature: -20-60 °C
Supply voltage: DC 5V
Output: 3 loop
Connection method: Anode
Maximum load current: 2A per way
Output power: 5V<30W
Compatiable IC: WS2812,SK6812
Note:
1 When switched to dynamic mode, the brightness rises to speed plus, the brightness decreases to speed minus, there are 100 speed files;
2 when the last state is press FADE or SMOOTH, press FLASH and STROBE The key is invalid. Only when the last state is static mode, FLASH and STROBE are valid.
3 When FADE is used as the three-color gradient, press FADE again to change to seven-color gradient. When pressing SMOOTH for three-color transition, press SMOOTH again. It becomes a seven-color jump.
Features:
1. Support ASUS / MSI / ASRock / other motherboards, the line is quite plug-in function
2. The line is RGB split line, not a fan split line, and does not support the motherboard fan (FAN) interface! ! !
3. If use for RGB fan is, please make sure the interface is consistent or can be connected.
