Custom LED — Ducati/KTM OEM Turn Signal Connector, 2-Wire (Pair) — Type 3

Exact-Fit OEM Plug · Plug & Play · MPN CL-DT2W-3

True Plug & PlayExact-Fit OEM Plug8″ 22AWG LeadsSold as a Pair (2)No Harness Cutting1-Year Warranty

Plug straight into your OEM harness — no cutting

Exact-fit OEM connectors with the wire leads already installed.Make your aftermarket or replacement turn signals plug right into the factory harness — no splicing, no crimping, no devaluing your bike by hacking up the wiring. 8″ of 22 AWG wire comes installed on each connector, with protective sheathing to prevent chafing.

Overview

Custom LED is pleased to offer these direct-fitment OEM Ducati/KTM turn-signal connectors with wire leads. Don’t hack up your harness — simply use these exact-fit OEM blinker connectors so your turn signals plug right into the factory wiring. Sold as a pair, with 8″ of 22 AWG wire installed on each lead.

Key Features

Exact-fit OEM Ducati/KTM turn-signal connector — true plug-and-play, no harness cutting
8″ of 22 AWG wire installed on each lead, with protective sheathing to prevent chafing
Sold as a pair (two per order) — enough for both sides
Keeps your wiring factory — no splicing, no resale-value hit
Backed by a 1-Year Warranty & Satisfaction Guarantee
Ships on or before the handling time promised on this listing

How It Works

Many aftermarket LED flush-mounts and blinkers don’t include the OEM connector, which usually means cutting and splicing the factory harness. These exact-fit Ducati/KTM connectors solve that: crimp or solder your turn-signal leads to the 8″ pigtails, plug into the OEM harness, and you have a clean, true plug-and-play connection. Cutting your harness can cause faulty connections and can devalue your motorcycle at resale — this keeps it factory.

Connector compatibility: it mates with connector CL-DT2W-1, and it does not mate with connector CL-DT2W-2. If you're matching this to an existing connector, double-check the type before ordering.

Specifications

Brand	Custom LED
Type	OEM Turn Signal Connector (pair)
Connector	2-wire (Type 3)
Wire leads	8″ of 22 AWG wire installed on each lead, protective sheathing
Quantity	Sold as a pair — 2 per order
Fitment	Direct OEM plug-in (no modifications)
MPN	CL-DT2W-3
Warranty	1-Year Warranty + Satisfaction Guarantee

Will This Fit My Bike?

Will it fit? Let’s make sure — this is the easy part. We don’t have a model list compiled for this particular connector, and even where we do it’s never complete. These OEM turn-signal connectors are shared across many models and years, and the connector type occasionally changes within a single model. Before you order, confirm one of two ways: (1) compare your bike’s stock turn-signal connector to the photos in this listing, or (2) message us a photo of the connector on your motorcycle and we’ll confirm the correct fit for you before you buy.

Exact-fit OEM turn-signal connectors for select Ducati, KTM, Triumph, and Yamaha motorcycles. The exact model coverage is broad — please use the confirmation steps above before ordering.

Need to run two sets of signals?The matching Y-splitter gives you two lamp connectors per side from one circuit.

View Y-splitter version →

Shipping: we ship every order on or before the handling time promised on this listing. Backed by Custom LED’s 1-Year Warranty & Satisfaction Guarantee, with US-based support if you have any fitment questions.

Building a plug-and-play setup?

Custom LED makes Blaster-X integrated tail lights and OEM connectors for 100+ motorcycles. Browse the full lineup in our eBay Store.

Shop all Custom LED

Custom LED • OEM Turn Signal Connector • CL-DT2W-3 • Manufacturer Direct