This offer is for a set of 4 AcDelco Spark Plugs.
Fits: (Please check Compatibility chart above to make sure your vehicle is listed before you purchase. Be sure to review the comments for important details/restrictions pertaining to your vehicle specifics. The chart may not be viewable on some devices such as smartphones).
| BUICK | 2004-2013 |
| CADILLAC | 2005-2013 |
| CHEVROLET | 2002-2013 |
| CHRYSLER | 2000-2010 |
| DODGE | 1999-2010 |
| FISKER | 2012 |
| FORD | 1995-2019 |
| GMC | 2003-2013 |
| HUMMER | 2006-2010 |
| ISUZU | 2003-2008 |
| JAGUAR | 2013-2017 |
| JEEP | 2009-2010 |
| LAND ROVER | 2012-2016 |
| LINCOLN | 2011-2019 |
| MAZDA | 2002-2017 |
| MERCURY | 1995-2011 |
| OLDSMOBILE | 2002-2004 |
| PONTIAC | 2002-2010 |
| PORSCHE | 2019 |
| SAAB | 2007-2011 |
| SATURN | 2000-2010 |
| SUZUKI | 2009-2010 |
ACDelco's RAPIDFIRE Performance Platinum Spark Plugs offer longer life and improved efficiency over time as compared to conventional spark plugs.
The RAPIDFIRE Platinum Spark Plug design features:- Ribless insulator that may improve the plug-to-boot seal.
- Tapered center wire electrode with a platinum pad that reduces the firing diameter and helps improve the firing efficiency by concentrating and directing energy needed to fire the plug with less voltage.
- One-piece integral suppressor seal that helps reduce radio frequency interference, meters spark plug energy to help provide long electrode life, and seals against compression leakage.
- Reduced sparking voltage & greater corrosion protection when compared to conventional spark plugs.
- Fits engines that run conventional plugs, as well as newer vehicles that require platinum plugs Includes several marine applications.
| Specifications |
|---|
| Approximate Resistor Value | 6-15k ohms | | Center Electrode Tip Material | Platinum | | Gap Size (IN) | 0.040 | | Ground Configuration | None | | Ground Electrode Quantity | 1 | | Ground Electrode Tip Design | None | | Height (IN) | 1.19 | | Hex Size | 16 | | Insulator Height (in) | 2.067 | | Insulator Height (mm) | 52.5 | | Length (IN) | 4.13 | | Manufacturer Heat Range | 12 | | Reach (IN) | 0.984 | | Resistor Type | Yes | | Seat Type | Tapered | | Thread Diameter (IN) | 0.551 | | Width (IN) | 3.62 |
Warranty Information:
3 Years |
|
|
|
|