Gas
Metal Melting Furnace is used to melt brass, gold, silver, copper,
aluminum, zinc, tin and other metals with melting points below 1300 ° C（2372 ° F）. Suitable for most fuels, liquefied gas，LPG, propane, etc.There is no gas furnace in the world that can melt iron.
Many other people's single burner furnace has a problem, the flame can only
heat one side of crucible strongly ,especially if you use a 10KG big
size crucible, the flame can only reach to 1/3 or 1/2 wall of the
crucible, the opposite side has no flame. So we often saw that some part
of metal in crucible has been melted, but some other part is not yet.
It means you need longer time and more gas to melt whole pot of metal,
my dual burner solved this problem by heating 2 sides of crucible at
the same time, it can save 50% time and 20% gas cost. As we know,
40%--70% gas energy is actually escaping in heating process, that is big
waste . So if you melt fast, you save more propane cost.
Package
includes all of items in my 1st photo,including crucible,tongs,gloves,fire brick,hose,instruction
manual.
1. Furnace body is made of stainless
steel( 1mm thick), no need painting, highly resistant to corrosion,
superior strength and durability; Can bear the weight of one adult.
2. Dual gas burner is made of stainless steel,each burner is around 100,000 BTU ,fast melting can save 50% time and 20% gas cost ;
3. Outside Dimensions : 12" diameter x 15" height (30cm x 37cm);
4. Inner Dimensions: 8" diameter x 10"Height (20cm x 24cm);
5.
Adjustable High Pressure Propane Regulator 0--30 psi , 5 ft long
(150cm). The end connects a standard size propane AU POL. Fit with
Australia gas tank.
6. Crucible can load 16 kg brass or 4.8 kg aluminum or 19 kg silver;
7. Furnace
body and lid are fully lined with 2 inch of ceramic fiber insulation.
Furnace floor lined with 3 inch of ceramic insulation and firebrick .You only need a propane gas bottle/tank ( like 20,30 or 50 LB ).
8. 10 KG Crucible Tongs and Lifter - 2 in 1 , safe and easy way to handle molten metals .
It is made from heavy duty steel. It has a 6 inch inner diameter ring can hold 10 kg graphite crucible.Total Length is around 24'' ( 60cm). One person can handle this tong, no need other people's help.
Our special advantage:
1.
Furnace body is made of stainless steel ( 1mm thick) ,easy to
clean,highly resistant to corrosion, lightweight and strong enough for a
people to stand on the body, see my Ebay photo. superior strength and
durability. Other seller's black oil painting is easily burnt or
discolour in long time using.
2. Dual burner can save 50% time and 20% gas cost.
3. Many other seller's burner head may
melted damaged after long time using in high temperature flame ,so you
had to change the whole burner. But our bell shape burner head can be
changed because it is connected by thread, you can buy replacement in
local shop cheap and easily .
4. You also can use only one burner by shut off the valve ,and block one hole on furnace body with my additional ceramic wool.
Kind remind：
1. Do not use it to melt iron, that will shorten the life of the furnace.
2. Graphite crucible is consumable, you can change a new one according to your requirement.3. Use safety goggles, mask as well as gloves while casting metals.
4.
The ceramic insulation blanket is not asbestos , Asbestos has been forbidden many years ago.