WTL1 : WiFi 0/1-10V RF PUSH Dimmer

​

Features

● WiFi + RF + AC push 0/1-10V dimmer, 1 channel output.

● Output 1 channel 0/1-10V signal, connect with 0/1-10V dimmable driver.

● Tuya APP cloud control, support on/off, brightness adjust, delay turn on/off light, timer run, scene function.

● Voice control, support amazon ECHO and TmallGenie smart speaker.

● 0-10V or 1-10V output selectable by DIP switch.

● 256 levels 0-100% dimming smoothly without any flash.

● Compatibility with RF 2.4G single zone or multiple zone dimming remote control.

● Each L1(WT) controller can also work as WiFi-RF converter, then use Tuya APP to control one or more RF dimming LED controller or driver synchronously.

● Connect with external push switch to achieve on/off and 0-100% dimming function.

● Light on/off fade time 3s selectable.

● Easy to be placed in standard wall junction box behind a push switch.

​

Input voltage: AC100-240V

Output signal: 0/1-10V (20mA)

Output current: Max 1.5A (AC)

Input signal: Tuya APP + RF 2.4GHz + Push Dim

RF Control distance: 30m(Barrier-free space)

Dimming Level: 256 levels

Dimming range: 0-100%

Noted: the remote is not included the battery.

​

Tuya APP network connection and operation

Press and hold Match/Set key for 2s,

or push twice Match/Set key fastly,

Clear previous network connection, enter Smart config mode,

the blue LED indicator fast flash.

Press and hold Match/Set key for 5s:

Clear previous network connection, enter AP config mode,

the blue LED indicator fast slow.

If smart config failed, please try AP config. If Tuya APP network connection succeed,

the blue LED indicator will stop flash,

and in Tuya APP, you can find DIM device. Tuya APP interface operation: Touch brightness slide to adjust brightness.

​

L1(WT) match RF remote control (Optional)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the L1(WT)’s Match key

Match:

Short press match key of L1(WT), immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.

Delete:

Press and hold match key of L1(WT) for 10s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:

Switch off the power of L1(WT), then switch on power, repeat again. Immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:

Switch off the power of L1(WT), then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

​