AUTHENTIC BRAND NEW

1 PAIR = 2 PIECES 

FAITAL PRO 6FE200 4 OHM

ITEM DESCRIPTION
Faital Pro 6FE200 6" Mid-Range 260W Car Audio Speaker 4-Ohm Pro 3-Way Speaker Application

FaitalPRO's open back 6FE200 6" professional midrange speaker is purpose-built to cover the critical midrange in three-way speakers, but also works great as a door speaker in car audio applications. To ensure absolute signal fidelity, FaitalPRO built the 6FE200 with a strong ferrite ring-powered motor. Not only does this increase sensitivity, it keeps the Qts at a respectable figure of 0.67. Made in Italy. 

Nominal Specifications

Nominal Diameter
  • 160 mm (6 in)
Overall Diameter
  • 167.4 mm (6.59 in)
Bolt Circle Diameter
  • 154 mm (6.06 in)
Baffle Cutout Diameter
  • 144 mm (5.67 in)
Depth
  • 77 mm (3.03 in)
Flange and Gasket Thickness
  • 8 mm (0.31 in)
Net Weight
  • 2 Kg (4.4 lb)
Shipping Box
(Single Carton Box)
  • 190 x 185 x 103 mm
    (7.5 x 7.3 x 4.1 in)
Shipping Weight
  • 2.2 Kg (4.9 lb)

Technical Parameters

Nominal Impedance
  • 4 Ohm
Minimum Impedance

AES Power Handling (1)
  • 130 W
Maximum Power Handling (2)
  • 260 W
Sensitivity (1W/1m)
  • 95 dB
Frequency Range
  • 85÷6000 Hz
Voice Coil Diameter
  • 37 mm (1.46 in)
Winding Material
  • Al
Former Material
  • Kapton
Winding Depth
  • 12 mm (0.47 in)
Magnetic Gap Depth
  • 8 mm (0.31 in)
Flux Density
  • 1 T
Magnet
  • Ferrite Ring
Basket Material
  • Steel
Demodulation
  • No
Cone Surround (3)
  • M-Roll
NET Air Volume filled by Loudspeaker
  • 0.45 dm^3 (0.016 ft^3)
Spider Profile
  • 1x constant height waves

Thiele and small parameters

Fs
  • 120 Hz
Re
  • 5.9 Ohm
Qes
  • 0.75
Qms
  • 6.2
Qts
  • 0.67
Vas
  • 3.0 dm^3 (0.11 ft^3)
Sd
  • 118 cm^2 (18.29 in^2)
Xmax (4)
  • 4.67 mm
Xdamage (5)
  • 10.4 mm
Mms
  • 11.5 g
Bl
  • 8.2 N/A
Le
  • 0.4 mH
Mmd
  • 11.1 g
Cms
  • 0.15 mm/N
Rms
  • 1.4 Kg/s
Eta Zero
  • 0.67 %
EBP
  • 160 Hz

(1) 2 Hours Test According to AES 2-1984 Rev. 2003
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Treated Polycotton
(4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)