Metal Screed Chairs.

Screed chairs are used to create a temporary support for a screed rail during slab construction.

The screed chairs can be used support scaffold tube or box section to create the screed rail to run your screed on. Typically used to create a support for a roller striker when finishing large slabs in one pour.

It is recommended to place the chairs approximately every 2 meters to enable sufficient support of the screeding machine.

Once the concrete has been levelling the screed rail can be removed. The top section of the chair is then unscrewed, surface is finished with a hand trowel.

The solid 'fingered' base provides an accurate and level support that will support large screeds such as roller strikers & Razorbacks

The Square Stirrup screed chairs feature a square support so that can be used with box section screed rail

Type 1

Thread adjustment 30mm           

Min slab thickness 120mm          

Max slab thickness 150mm

Type 2

Thread adjustment 50mm           

Min slab thickness 150mm          

Max slab thickness 200mm

Type 3 

Thread adjustment 100mm           

Min slab thickness 200mm          

Max slab thickness 300mm

Type 4 

Thread adjustment 150mm           

Min slab thickness 300mm          

Max slab thickness 400mm