Locking Long Throw Lock with Elongated Keep and Stainless Steel Bar For Gates and Doors of 70mm Thick Single Lock - Key Lockable from one side (single) Black Finish with Stainless Steel Bar 6 pin mechanism for higher security and greater key variations. Can be fitted on left or right handed doors/gates. Heavy duty A4/316 marine grade stainless steel bolt. Solid brass escutcheon plate. Stainless steel fixings for extra protection against corrosion. Key one side, spring latch other. 5 keys supplied.

Item Description
  • PERFECT 70 MILLIMETERS SINGLE GATE LOCK FOR GARAGE DOOR OR GARDEN GATE SECURITY: Premium quality Rimlock single Locking Bolt to Suit 70 millimeters (2.75 inches) Doors and Gates (Size is equal to gate and door depth)
  • SIMPLE INSTALLATION: Each garden lock comes individually boxed with a full set of fitting instructions, stainless steel fixings and heavy duty 18 x 18 millimeters marine grade 316 stainless steel locking bar and a solid brass escutcheon plate
  • CREATED TO REDUCE CRIME: Added security gate lock - made with 6 pin lock barrels. Ideal to be used as an extra shed or patio door security
  • This garden gate lock is perfect for any side gate or back gate lock.
  • EXTRA KEYS: Haven Heritage long throw lock are supplied with 5 keys in the box.
  • Designed for single or double gates. Key lockable from one sides of gate with 5 keys, the unique bolt design with hardened steel core and Brass escutcheon plate has an extremely high corrosion resistance. Grade 316 stainless steel shoot bolt, and elongated anti-rattle keep prevent rattling during windy weather.
 
• Lockable from one side of gate
• Clear fitting instructions and Template
• Fitting template included for left or right hand installation
• Max gate thickness 70mm
• High corrosion resistance
• Anti-rattle


Drill/driver bits and stainless screws included

Fitting Instructions

Step One: The lock should be fitted to the door or gate once it has been hung and all necessary adjustments have been made. The lock body should be mounted inside (secure side) of the gate, with just the barrel showing outside - to prevent any tampering with the lock
 
Step Two: Work out the position the lock should be mounted and mark affix the template. The lock body should be no less 5mm from the edges of the gate and obviously the throw of the lock needs to reach across to secure the gate. Also Check on the other side of the gate to ensure the hole is in a suitable position.
 
Step Three: Using the drill bit supplied make sure the hole is drilled level and straight for the best performance of the lock. Drill through until the central point of the drill bit protrudes out on the back and then finish the hole off from the back side to avoid splintering the timber.