Long lasting natural looking protection. Lasts through the season and can be renewed without deep cleaning or stripping for years! 

SEMCO Teak Sealer is a solvent based sealer which contains pigments, UV inhibitors and moisture protection. SEMCO Teak Sealer is manufactured in several shades. 

Once applied, your teak will not turn grey or allow the growth of mildew. Surface soil can be washed away with mild detergent, and with seasonal recoating the teak will be preserved in its natural state for many years.

HONEYTONE - the most popular choice for our furniture customers. This shade gives the wood a rich "honey" colour, similar to the colour of the wood when it is new. Please note: Results may vary due to the colour and condition of the original wood you are applying our shades to. 

SEMCO does not contain silicone, varnish, polymers or exotic oils. 

Coverage: Approximately 30m2/gallon (2 Coats required for initial application to give an even finish)

How to Apply: Make sure that the teak has been washed and ensure that the wood is completely dry before sealing. We recommend 48-72 hours in between cleaning and sealing, in order to avoid sealing any moisture in. 

Make certain you stir the contents of the tin thoroughly and keep mixing whilst applying the sealer to guarantee an overall even finish. Apply the sealer with a foam brush or cloth, to avoid unsightly brush marks that may be left should you use a paint brush. 

It is suggested, for the best results, apply the second coat on the same day, a couple of hours later, wiping off any excess as you go.  

Semco Teak Sealer: Semco Teak Sealer is a solvent based teak sealer which contains pigments, UV light inhibitors and moisture protection. It does NOT contain silicone, varnish, polymers or exotic oils!

Applications: For use on all hardwoods, yachts, decks, rails, cockpits, swimming platforms, garden furniture, garage doors, wooden surrounds and frames. 

Recommendations: Apply single or double coat. Top up once in spring, approx. March / April and once in winter approx. September / October. 

Technical Data: 
  • Store below 50oC 
  • Touch dry within in 2-4Hrs 
  • Fully cured in 24Hrs 
  • VOC less than 700mg