now available with a speed control PWM control 10 A, a 12 V power supply is required for operation (not included), preferably a 12 V battery. Turning the motor on the axis can damage the power stage of the control when the control is connected
Extremely strong Ideal for antenna rotor controls, tuning of reels, as Grill motor,
Also suitable for the construction of a mash mixer for hobby beer brewers
versatile for model making.
were built with other model cable cars
The gearbox is not self-locking, so the axis can be moved when de-energized.
All-metal housing. Korean quality product. Brand new.
Technical specifications:
Overall dimensions: approx. 100x56x75mm
Operating voltage: 6 .... 12V DC voltage
Speed max: approx. 32 RPM at 12V
Minimum start voltage: 2V
Max. Current consumption (gear blocked): approx. 2.2A
Idle current consumption: approx. 0.2A
Max. Power (gear blocked): approx. 36 kgf / cm (3.53 Nm)
Speed of the flanged motor (without gear): approx. 2800 rpm
Drive axle diameter with crank removed: 8 mm
Weight: approx. 0.39kg
Length of the crank from center to center 35 mm
extremely quiet only 25 db
If requested with the crank removed, the shipment is included.
Please state in the message to the seller
Remove the crank
The easiest way is of course if you use a suitable approx. 2.4 mm pin punch
to use a vice to drive out the cotter pin with his help and a few hammer blows.
If there is no pin punch available, it can also be done with a blunt-ground nail, preferably
made of steel of the same diameter.
A short cable is included to connect a plug-in power supply with a hollow plug.
Due to the current situation, there may be delays in delivery.
Since preferably in several countries outside of Europe at this time
can not be delivered, we ask you before your purchase to inquire whether your country
is affected by the delivery restriction.
versatile for model making. were built with other model cable cars All-metal housing. Korean quality product. Brand new.
Technical specifications:
Overall dimensions: approx. 100x56x75mm
Operating voltage: 6 .... 12V DC voltage
Speed max: approx. 32 RPM at 12V
Minimum start voltage: 2V
Max. Current consumption (gear blocked): approx. 2.2A
Idle current consumption: approx. 0.2A
Max. Power (gear blocked): approx. 36 kgf / cm (3.53 Nm)
Speed of the flanged motor (without gear): approx. 2800 rpm
Drive axle diameter with crank removed: 8 mm Weight: approx. 0.39kg Length of the crank from center to center 35 mm extremely quiet only 25 db If requested with the crank removed, the shipment is included. Please state in the message to the seller Remove the crank made of steel of t