| OE Manufacturer: | DENSO |
| Product Type: | Alternator |
| Weight: | 11.6500 |
| Condition: | NEW |
| Unit Source: | |
| Design / Type: | |
| Design / Type: | |
| Design / Type: | PMA |
| Starter Series: | |
| Location - General: | |
| Location - Specific: | |
| Design Type: | |
| Voltage: | 12 |
| Amperage: | 90 |
| kW: | |
| Rotation: | CCW |
| Regulator/Fan: | IR/IF |
| Tooth Count: | |
| Spline Count: | |
| Polarity: | |
| Shaft Type: | |
| Duty Cycle: | |
| Horsepower: | |
| RPM: | |
| V-Set: | |
| Circuit Type: | |
| Plug Code: | 294 |
| Plug Orientation: | |
| Pulley Class: | S4 |
| Case OD (mm): | |
| Overall Length (mm): | |
| Gear OD (mm): | |
| Pulley Belt Width (mm): | |
| Pulley OD (mm): | |
| Shaft Overall Length (mm): | |
| Shaft OD (mm): | |
| Clutch Type: | |
| Operating Mode: | |
| Pads Included: | |
| Connection Type: | |
| Piston Material: | |
| Number of Pistons: | |
| Piston Outside Diameter (in): | |
| Piston Outside Diameter (mm): | |
| Bleeder Port Measurement: | |
| Inlet Port Measurement: | |
| Ignition Type: | |
| Housing Material: | |
| Torque (ft. lbs): | |
| Pulley OD (in): | |
| Crankshaft OD (in): | |
| Terminal Type: | |
| Sensor Included: | |
| Idle ACM Included: | |
| Cage Wheel Included: | |
| Wiring Harness Included: | |
| Number of Pistons: | |
| Caliper Pistion OD (mm): | |
| Motor Overall Length (in): | |
| Motor OD (in): | |
| Wheel OD (in): | |
| Bearing Inside Diameter (mm): | |
| Bearing Outside Diameter (mm): | |
| Bearing Width (mm): | |
| Rotor Inside Diameter (mm): | |
| Rotor Outside Diameter (mm): | |
| Rotor Overall Length (mm): | |
| Rotor Shaft Outside Diameter (mm): | |
| Rotor Shaft Overall Length (mm): | |
| Mounting Hardware Included: | No |
| Installation Hardware Included: | |
| Mounting Type: | |
| Mounting Type: | |
| Mounting Type: | |
| Cap Design: | |
| Plunger Type: | |
| Includes: | |
| Includes: | |
| Number of Mounting Holes: | |
| Number of Terminals: | |
| Number of Wires: | |
| ETB Inside Diameter (in): | |
| Terminal Type: | |
| Hose Inside Diameter: | |
| Minimum Flow Rate: | |
| Minimum Pressure: | |
| Unit Finish: | |
| Unit Color: | |
| Number of Pieces: | 1 |
| Country of Origin: | CN |
| Country of Use: | |
| Notes: | PERMANENT MAGNET |
| Other Part #: | 101211-5430 9761211-543 101211-5400 101211-5420 |
Customer Service Available 7 Days A Week
Acura Integra 1994-1995 L4 1.8L 1797cc B18C1 Denso 80 Amp, Opt. Canada
Acura Integra 1994-1995 L4 1.8L 1797cc B18C1 Denso 90 Amp
Acura Integra 1994-1995 L4 1.8L 1834cc B18B1 Denso 80 Amp, Opt. CAnada
Acura Integra 1994-1995 L4 1.8L 1834cc B18B1 Denso 90 Amp, Std.
*NOTE: "M.T" Indicates Manual Transmission / "A.T" Indicates Automatic Transmission*
Please Reach Out To Customer Service To Confirm Fitment, If Necessary.
Honda: 31100P750030
Denso: 101211-5430, 9761211-543, 101211-5400, 101211-5420, 101211-5410, 9761211-541
Lester: 13529, 11100
Arrowhead: AND0106, AND0468
J & N Automotive: 90-29-5230
AC-Delco: 334-1207
Delco Remanufactured: 10464185, 10464186
Remy Remanufactured: 14276, 12648
Rayloc: 13-8687, 138687, 138688
NAPA: 213-8687, 213-8688
MPA: 13529, 15518, 13530
NAPA Pro Series: 13530
BBB Ind: 13529, 11100
Wilson: 90-29-5230, 90-29-5410
Carquest: 13529A, 11100A
Bosch Remanufactured: AL1268X, AL1309X
Delphi: RM4062
Wilson New: 90-29-5230N
Hollander: 58542, 58541
LTD New: N13529
BBB New: N13529
Rayloc New: 1N8687
Carquest New: 13529AN
Denso First Time Fit: 210-0211
Romaine Electric: 13529N, 36-13529
Dixie Electric: A-8441, A-8952
WE STRIVE TO PROVIDE A 5 STAR EXPERIENCE!

Our objective is 100% customer satisfaction. If we did not fulfill your expectations please contact us using eBay messager.
All of our products are covered by a one year warranty from the date of purchase.
We offer warranty for products that have a manufacturing defect due to materials or workmanship. The warranty does not cover failure due to abuse, misuse, improper installation or modifications. We are not liable for the cost of installation, removal or any other expenses beyond the original purchase price of the item.
It is the responsibility of the customer to verify the correct application information prior to purchasing any product from our eBay store. All purchases made in error may be returned within 30 days from the date of purchase and are subject to a 20% restocking fee. The product must be returned in its original condition including the packaging.
Free shipping on purchases shipped to all 50 states.
We offer international shipping through eBay global shipping program.
We process and ship orders within one business day of the order information being received. With the exemption of U. S. holidays.
Expedited orders including next day, second day and third day delivery methods are processed and shipped the same business day if checkout is completed by 5pm Eastern Time.
We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. OEG Parts is not responsible for carrier delays such as weather or natural disasters.
All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return
To receive an RMA Please contact OEG Parts Customer Service.
All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
We always recommend cross referencing a part number to ensure fitment as well.
You may Contact Us by locating the "Contact Seller" Button within a listing.
After making a purchase, the phone number will be visible to you through eBay when you click on "Contact Seller".
You can also find our phone number by clicking on FAQs > Other
It is against eBay Policy to provide you our contact information any other way.
categories