Tractor Top Link Pin, Cat 1, with Cat 2 Conversion Bushes, &  linch pin.

Cat 1 pin is 19mm diameter, Cat 2 bushes are 25mm external diameter.

Pin has 121mm useable length, from shoulder to edge of pin hole.

Bushes are 16mm long each, giving a 16mm Cat 2 section at each end of pin, & 80mm of Cat 1 length between bushes.

Ideal for fitting a machine with Cat 2 holes to a Cat 1 top link.

Please note,  Lower Link Pins are a greater diameter than Top Link Pins. 

Cat 1, 2, 3 or 4 Lower Link Pins are not the same diameter as Cat 1, 2, 3 or 4 Top Link Pins, they are not interchangeable, please measure before you order if you are unsure.

Please note, all linkage pins are standard sizes, Cat 0, 1, 2, 3 or 4, unless stated otherwise,

all measurements are approximate & are intended as a guide only.