3 Channel Injection Pump Laboratory Microinjection Pump Dispensing Apparatus Syringe Booster

Specification:
Clampable syringe: 1ml ~ 50ml(Max)*3 (diameter <38mm)
Speed range: continuously adjustable 0.1mm/h - 5940mm/h
Time setting: 1 second to 17 hours
Working mode: manual control, timed work, communication control
Equipment working power: 12V2A
Adapter power supply: 100~240V/50Hz
Motor length: 62mm
Slider stroke: 140mm
Single circle lead: 1mm
Max pushing force: about 50N
Size: 290mm*130mm*130mm
Weight: 1.5kg

Feature:
1. In addition to the MM unit, the controller also contains the sizes of 1, 2, 5, 10, 20, 30, 50ml syringes, and automatically switches to ML ml after selection
2. 8mm diameter stainless steel round guide rail is adopted, extended bearing with flange, the screw rod adopts T8 lead, 1mm screw, copper screw nut
3. Clamping adopts pressing block, M4 hand nut fastening
4. The motor is the 42 step motor, large torque motor is adopted, the single lap is set to 400 steps
5. Controller, 1602 liquid crystal display, 4 buttons can set speed, work time, work mode, and the other 4 buttons for controlling the machines, respectively, fixed speed movement and high-speed movement. The set parameter saves the power storage. Quick press add button. BoardReserved TTL level RS-232 interfaceThe control button also has an external interface that can be used for interfacing. Switch off external switch and foot switch etc. You can connect external controllers such as computers and PLC

Note:
Because of the different types of syringes installed, the design only takes into account the displacement and speed settings. In use, you need to use a ruler to measure the distance of the syringe, then calculate the speed of propulsion and get the corresponding velocity
About the position of the motor. According to the requirements of some users before, the shopkeeper designed the motor at the other end of the injector
Many customers have asked about the thrust of the problem, where the treasurer tested with a soil approach, you can pull 5 kilograms of weight, so you can thrust at about 50N

Include:
1 x Injection pump
1 x Controller
1 x Adapter

Note: it is not recommended to use it for electrospinning experiments!