Document
Features
  • Compatible with CVI1080P, TVI1080P, AHD720P, AHD1080P. It's not suitable for CVI720P
  • BNC male to BNC female with mini cable 18cm on both sides.
  • Passive, no power required.
  • Prevents video-signal distortion caused by video ground loops.
  • Eliminates pictures tearing, cross talk and rolling.
  • Prevents power cables laid by other interfering with the CCTV system.
  • Built in Video filter, perfect to work with DVR to immunity DVR interference, for extra interference rejection.
  • Built in TVS (Transient Voltage Suppressors) for surge protection.
Specifications
Insertion Loss 0.5dB Frequency Response 20HZ-60Mhz, +/-4dB
Input Resistance 75ohm Output Resistance 75ohm
Isolation Voltage 600VDC (Min) Insulation Resistance 100M Ohm
Transient Voltage Suppressors 12Vrms Dimension 52*62*22mm/2.05"*2.44"*0.87" with 18cm/7.09" x 2 cable
Material ABS  
Installation View
  • The video ground loop isolator should be installed where runs of video cable are known to have ground loops. It must be installed in the video cable that has come directly from the camera, but before the cable has been connected to anything else.
  • If several video cameras come from the same area, fix a Video Ground Loop Isolator in every cable, or a ground loop will still remain.
Package
  • 1 x Video Ground Loop Isolator