Please contact us, if you have any question.

 1(972)-423-6829

Why do I need to buy Hyper Networks Cisco LAB KITs?

Firstly; Cisco made CCNA 200-125 V3 exam harder than the CCNA 200-120 V2 exam. Cisco wants to make sure you really know your stuff on this exam. CCNA 200-125 V3 exam includes multiple choice, multiple answer, drag-n-drop, interactive router simulations, testlet and simlet question types. Especially, you need to study with actual devices for understanding interactive router simulations, testlet and simlet questiontypes. You need to have a high-level understanding of what is happening for passing the exam. You need to practice on more complex setups and you need to understand very well what is happening. That is why we set up these lab kits and provide you to work with actual devices.

 

Why do I need a physical router?

You need a physical router because:

*The simulators don't have the ability to give you the hands on.

*You need to see what happens when you disconnect a cable.

 *You may put a cable in the wrong location or just plain configure the interface incorrectly.

*Dependent on what you do by mistake, you may see either the interface or protocol go down.

 *You can do troubleshoot based upon that it should give you a clue of where to start troubleshooting.

*You can see what layer is the interface at and what layer is the protocol at.

* You can find quite quickly which mistakes you make on Router 1 which can affects other Routers.

No simulator can simulate that, so real routers and switches are invaluable.

All Products are fully tested. 

Please contact us, if you have any question.

 1(972)-423-6829

30 DAYS WARRANTY

Included Items in the lab:

Routers:

1x Cisco2811 256MB Dram/128MB Flash Call Manager Express CME 8.6 

                2x Fast Ethernet Interfaces  

                2x Serial Interfaces  

                IOS 15.1 : c2800nm-adventerprisek9-mz.151-4.M10

1x Cisco1841 256MB Dram /64MB Flash  

                2x Fast Ethernet Interfaces

               1x Serial Interfaces  

               IOS 15.1(4) IOS c1841-adventerprisek9-mz.151-4.M9  

1x Csico1841 256MB Dram/64MB Flash  

              2x Fast Ethernet Interfaces

              1x Serial Interfaces  

              15.1(4) IOS c1841-adventerprisek9-mz.151-4.M9  

Switches:

1x WS-C2960-24TT-L IOS 15.0   c2960-lanbasek9-tar.150-2.SE8

               24x Fast Ethernet Interfaces

               2x Gigabit RJ45 Interfaces

 1x WS-C2960-24TT-L IOS 15.0   c2960-lanbasek9-tar.150-2.SE8

               24x Fast Ethernet Interfaces

              2x Gigabit RJ45 Interfaces

1x WS-C3560-24PS-S POE (Power Over Ethernet)  CCIE LEVEL SWITCHES, LAYER 3 ,  

                24x Fast Ethernet Interfaces

               2x Gigabit SFP Interfaces

                     with latest EMI IOS 12.2   c3560-advipservicesk9-tar.122-44.SE6


Wireless Controller and Access Points:  

1x AIR-WLC4402-12-K9 

        Cisco 4400 Series Wireless LAN Controller supports 802.11a/b/g and the IEEE 802.11n draft 2.0 standard
Access Points:

3x AIR-LAP1131AG-A-K9 a/b/g  (Power will be supported from POE switch doesn't need Power Cubes)

Module Cards:

4 x WIC-1DSU-T1-V2 Serial Module Card

Cables:

6x Ethernet Cable

2x Serial Connection Cable 

2x Crossover Cable

8x Power Cable

BONUS ITEMS:

2x Cisco CP-7940G IP Phones

1x 12U Desktop Rack

1x Cisco USB to RJ45 console Cable

Bonus DVD:

1x DVD  

- SDM Software

- TFTP Software

- Lab examples, questions and answers, manuals, configuration examples.

How Many Routers Do I Need for my Cisco CCNA Lab?

Let`s explain to you what you can do with one, two or three routers.

One router will give you the ability to run the commands on it and will allow you to memorize the correct syntax and context in which to run the commands. 
Two routers will allow you to be able to see route table information propagate, data propagation and path election. In addition, you will see basic device elections. 
Three or more routers and you will get all the above, more complex topologies and full device elections.

We strongly suggest you buy three router kits.

How Many Switches Do I Need for my Cisco CCNA Lab?

Let`s explain to you what you can do with one, two or three switches.

One switch will give you the ability to run the commands on the switch and allow you to memorize the correct syntax and context in which to run the commands. It will also allow you to do some of the VLAN labs. 
Two switches will allow you to see VTP Domain & VLAN information propagate. In addition, you will see basic device elections. 
Three or more switches you will get all the above and full device elections.

We suggest to you buy our three switch lab kits because of having the best learning experience.

   

Please contact us, if you have any question.

 1(972)-423-6829