GWYN LEWIS 4x4
Please see my EBAY shop for more items.
1 x Challenge Rear Suspension Hardware Kit.
Weight :- 8.5kg
Manufacturer :- Gwyn Lewis 4x4.
Fits Rear Defender 90, Disco 1 & RRc (not 110/130). A Fuel filter remount kit will be required for Defender 90 Td5 and Puma.
If you need any information on these please contact me on the contact details above.
This is a bolt on kit designed by Gwyn Lewis 4x4 to fit Land Rover Defender 90, Discovery 1
& Range Rover classic vehicles. The main aim of the kit is to
provide long travel suspension and ride quality for off road
applications, the shocks required are a + 5.5 inch, 11 inch travel, Pin/Pin type the same as the front shocks, by using the Pin on the top mount there is more movement in all directions, the trouble with the standard Eye top mount is it can move front to back, but sideways movement is restricted and causes the Eye to brake off when longer shocks are fitted, by using the same shock on the front and the back you can carry 1 spare if you want, the rear shock mounts are moved forward and upwards to allow room for the longer shock length, this allows the spring to compress on
full upward travel, upward travel is more important than drop out as you
want your wheel to move upwards to get over obstacles, but this kit also gives a lot of downward movement as well, keeping your wheels on the ground at all times helps on traction and takes the pressure off the drive train.
The rear spring relocators guide the rear spring back in as normal
but on extreme drop out they catch the last coil of the spring to stop
it from coming past the re locator, the hook does not limit the drop out in any way as on the Land Rover suspension when one wheel is pushed up the oposit side is pushed down as it pivots on the A frame joint,
jacking the vehicle up is quite simple by placing a round bar or a wheel
brace through spring and re locator to minimize axle
movement (to hold spring up) when using a hi lift jack.
The rear spring retainers will clamp the spring to the spring seat more secure than the flat bar type, they are multi hole so you can position the spring to catch on our challenge rear spring re locator hook, they are made out of 3 mm galvanized steel plate and pressed into the spring shape which will help stop springs braking, which is common on the thicker flat bar type retaining plates.
I designed this kit many years ago for off road use, but
with the right shocks and springs fitted the on road handling is very
impressive to, this kit does not lift the vehicle it is the springs that
do that, you can use this kit on a 4 inch lift down to standard height,
but mainly a 1 inch or 2 inch lift is what i recommend it for, all these items are galvanized for corrosion resistance.The main aim of the kit is to
provide long travel suspension and ride quality for off road
applications.
This kit consists of :-
1 x Pair challenge rear shock mounts GALVANIZED.
1 x Pair Heavy Duty rear spring
retainers (round type) GALVANIZED.
1 x Pair Challenge rear spring relocators Heavy Duty 6mm (hook type) GALVANIZED.
All nuts and bolts required to fit this kit will be supplied.
Please note that this kit does not fit 110 as they have larger rear springs, 110 kits are avaliable contact us for details.
+ 5.5 inch, 11 inch travel shocks will be required to complete this kit.Any questions please contact us.
Items are normally sent out same
day or next working day.
If there are other items you
want I will combine the carriage cost for you, to do this add all the items you
want to your Basket and then from there click the ”Request a total from seller” link, we will
calculate postage due and send an updated invoice to you.
If
buying more than one item please wait for us to discount the postage (this
can’t be discounted or refunded after you have paid)
Carriage Price for UK mainland only, for Scottish Highlands, Ireland, and Channel Islands please contact us for a quote.
Please leave a Telephone Number for the carrier when ordering them, it may delay the delivery if you dont.
Thanks for looking