eBay

Listing is for a single 9mm NDG7475 1W 520nm laser diode mounted in a 12mm x 30mm copper module with thermal back half, leads and a G-2 glass lens.

Save yourself the headache of pressing and soldering. Just add heatsink and proper laser driver limiting the current to 2.4A or less.

Here is what you get. One 9mm 1W 520nm diode mounted in a 12mm x 30mm copper module with leads and a G-2 glass lens.

Here is the Pinout for the diode. Ignore the non existent case pin in the diagram.

Diodes are current hungry and as they heat up their internal resistance is lowered causing them to want to draw more current. Don't attempt to connect the diode directly to a fixed voltage source like a battery. You must use a "constant current" laser driver with the current limited to no more than 2.4A.

Here is my testing on this diode

Nichia NDG7475 1W 520nm Laser Diode
Exciting day. Finally got my 1W Green diodes and could not wait to do some testing on them.:eg:

This 9mm diode has off center pins.

First thing I did is pop one in a sink and fire it up. Was amazed the brightness of the beam indoors during the day. Really bright.

Then beam specs and divergence seem to be nearly the exact same as the NDB7875 and M140 445nm diodes.

This diode with the G-2 has a pretty identical box reflection as the NDB7875 and M140 as well.

So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2.

So now on to the meat here is the LPM test of the diode. I expected this thing to dim maybe around 2.5A but it just kept going. I decided to end it when I started getting foldback around 3.5A. There really was not much gain from 2.5A up but wanted to see where it dimmed but it never did at least to where I felt it would not blow up as they are kind of pricey.:whistle:

Would not suggest driving past this point. Stay 2.4A or under.

There you have it. Whole lot of of Green goodness. Oh and for some dark shots.

*Disclamer*

By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .

- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.

- You will use these as components and properly incorporate them into a finished product.

- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.

- You are legally responsible for the use of these components, improper use of these components or their end products.

- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.

- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.