Custom LED Blinker Genie for Motorcycles (pair)

Converts 2-Wire LEDs to 3-Wire for Run and Turns!

(formerly known as Magic Blinker - same product, new name!)

Manufacturer Direct purchase with Warranty and Satisfaction Guarantee!

 

    • Made in the USA!
    • New high-speed solid state design is compatible with all flasher relays.
    • Built-in Stage I Load Equalizer helps prevent the no-blink or 4-way blink condition.
    • Comes as a complete kit with electrical connectors and detailed instructions.
    • OEM Turn Signal Connectors available for a Plug-And-Play Install (sold separately).
    • High-Power capability of 12A/ 180 Watts (2A/ 30 Watts recommended).
    • Low on-state resistance means your indicators will be as bright as possible!
    • Works with LED or incandescent indicators.
    • Designed for Motorcycles (see Automobile/Car special note below).
    • Manufacturer direct purchase!
    • Typically ships same business day!
    • 1-year Warranty & Satisfaction Guarantee!
    • In Stock!
    • QTY 2 Blinker Genies included, sold in PAIRS, one left one right.

OVERVIEW

The Custom LED Blinker Genie is designed to allow single filament light bulbs, and single intensity LED lamps, to function as both running lights AND blinkers!  The Blinker Genie is designed for use on Motorcycles.  For Automobile applications, check out our Blinker Genie 2!

Most aftermarket LED blinkers support only a two wire connection, which means they can only be used as either a running light, or a blinker light.  The Blinker Genie solves this problem, and intelligently controls the lamp to function as BOTH a running light and a blinker!

Properly connect any two-wire incandescent or LED indicators to the Custom LED Blinker Genie, and your indicator bulbs/LEDs will now stay on constantly as running lights, and blink when you engage the blinkers!  (Note: the indicator will turn off for the duration of the blinker pulse - this is how the blinking is achieved.)

The Custom LED Blinker Genie is designed to be as small as possible while being as versatile and robust as possible.  The finished dimensions of the unit will measure approximately 0.7" x 1.25" X 0.25" and can support up to 12A of current (see specifications)!  This ensures our product will work for any application (blinking your headlights individually, or powering one single LED lamp for instance).  To further ease installation and ensure dependability, the Custom LED Blinker Genies are water resistant.

Each Blinker Genie controls up to 2A worth of lamps in the recommended configuration.  The Blinker Genie's are sold IN PAIRS.  One will be required for each side of the motorcycle, and for every 2A worth of operated indicator load (25W).

For most applications, they are used in the front to drive two wire LED indicators.  Technically, if you ran wires to the back, you could control the rear blinker lamps with the Blinker Genies as well.  However, it is recommend that you use one Blinker Genie for each "corner" of the vehicle.

The Blinker Genie comes with 7" wires, butt-connectors and detailed installation instructions!  Please read the important notes in the Installation Tab for other accessories that may be required to maintain proper function of the blinker system after installing the Blinker Genie.

ELECTRICAL SPECIFICATIONS

  • Maximum Recommended Indicator Load: 2A (30W)
  • Maximum Switching Current: 12A
  • Internal Resistance: 0.18 OHMS
  • Maximum Switching Speed:  1Mhz
  • Switch type: Advanced Power MOSFET
  • ONLY functions with a Negative Ground System (most common)

 

INSTALLATION

Typical Installation Diagram

 Installation Instructions

Installation of the Custom LED Blinker Genie is detailed in the instructions below.

reader_icon_special

click icon to download

Adobe Acrobat Reader is required to view this file.

If you are having problems viewing the file, please download the free software here.

For technical questions, please contact us VIA Ebay Messaging.

AUTOMOBILE/CAR INSTALLATION: 

The Blinker Genie was designed specifically for use on motorcycles where the running light circuit is on anytime the vehicle is in operation.  We do not recommend installing this product on an automobile where the running light circuit can be on or off.  For automobiles, we have a purpose-built Blinker Genie 2!

GENERAL NOTE: 

For motorcycles that do not have running lights in the front of their motorcycle (such as the new Kawasaki sportbikes), the red wire on the Blinker Genie must be connected to an ignition switched source for proper operation.

HONDA BLINKER SYSTEM SPECIAL NOTE: 

In order to properly utilize the Custom LED Magic Blinkers on many Honda Motorcycles, the constant power input wire (red) must be connected to a ignition switched source (other than that for the front stock blinkers). The little running light near the headlight is a perfect power source, OR you can connect the left and right running light wires together to create a constant running light source.

The reason is because the running light wire that runs to the front signals cuts off completely when the blinkers are activated, and stays off until the blinkers are canceled. This causes the operated load (LEDs or lamps) to not work properly as the Magic Blinkers are designed to draw all power from the "running light" input wire.

Using a voltmeter, you can easily verify if you are having this problem. Simply measure the voltage on the RED input wire on the Magic Blinker to check for constant 12V power - blinkers on AND off.

SHIPPING

NON USA BUYERS SHIPPING NOTE: Please note, USPS First Class Mail International can take up to 45 days to arrive to some destinations! If you need this product quicker than that, please consider the other two faster shipping options (Priority and Express). Thank You!