MANI TESTERMANI TESTER

Fluke Networks DSX-5000 Versiv Cat6 Cat6a LAN Cable Certifier Calibrated in 2025

Inspected in JapanShips from JapanTracked Express

Item Condition

[Guaranteed] Arrived in working condition from a development institute or research center.

Please purchase this item with the understanding that it is a used item.

Cosmetically there are scratches, scuffs and dirt on the housings, with rub marks and line-shaped soiling near the body seams and slight stickiness on the surface of one body; no large chips or cracks were found on the yellow protective bumpers. The main unit LCD is clean with no scratches or spots after removal of the old screen protector, and the module interface pins are straight and undamaged.

Please note: the internal clock has reset to 1970/01/01 and must be set before saving results.

Operation Check

  • Power: both main and remote units power on; charging LED lights red when the AC adapter is connected
  • Display: main unit home screen shows normally, touch operation moves between screens, no scratches or spots on the LCD
  • Basic operation: TOOLS and setting screens respond, test limit can be changed
  • Set Reference (main to remote, direct connection): completed with "Set reference is complete."
  • Channel Autotest (2x DSX-CHA004, white patch cord direct): PASS on TIA Cat 6A Perm. Link (+PoE) limits - LENGTH 2.0 m, INSERTION LOSS 42.1 dB, NEXT 17.9 dB, PS NEXT 18.2 dB
  • Channel Autotest: PASS on TIA Cat 6A Channel limits - LENGTH 2.0 m, INSERTION LOSS 47.6 dB, NEXT 18.7 dB, PS NEXT 18.6 dB
  • Wire map: 1-1 through 8-8 straight, all pairs normal (T568B)
  • Batteries: main indicated 87 percent, remote 70 percent; both units charge from the AC adapters
  • Firmware: main and remote Software V6.14 Build 9 / Hardware 4, Limits V7.11 / Cables V7.11; both modules Software 1.55 / Hardware 6
  • Module calibration labels: calibration date 2025/11/14 on both modules
  • Internal clock: reset to 1970/01/01, date and time must be set before saving or exporting results

Included Items

Main units:

  • 1x Versiv main unit
  • 1x Versiv remote unit
  • 2x DSX-5000 CableAnalyzer modules

Adapters and cables:

  • 2x DSX-PLA004 permanent link adapters (with cords)
  • 2x DSX-CHA004 channel adapters
  • 2x white Cat 6A patch cords
  • 2x RJ45 universal adapters (marked UNIVERSAL ADAPTER RJ11/45)
  • 2x metal shielded RJ45 plugs
  • 2x USB cables

Power:

  • 2x AC adapters (SL Power Electronics CENB1030A1500F03, INPUT 100-240V 50/60Hz 1.0A, OUTPUT +15V 2.0A, detachable cord)
  • 2x power cords (3-pin; one is a US 3-pin plug configuration with a ground-wire adapter)
  • 2x MBP-LION lithium-ion batteries (39 Wh)
  • 2x battery doors

Other:

  • 2x straps
  • 1x CD (Versiv Open Source Software Licensing Support Materials, Product Software 6/2016)
  • 1x DSX CableAnalyzer getting started guide (Japanese), Versiv software leaflet, product registration card, WEEE sheet
  • 1x PLANEX GW-USNANO2A USB wireless LAN adapter with quick guide (may not be an original accessory of this tester)

Please check the photos for exactly what is included.

Please check the photos for the included accessories.

Product Info

The Fluke Networks DSX-5000 CableAnalyzer is a copper cabling certification tester from the Versiv family, used to certify and troubleshoot twisted pair LAN cabling up to Cat 6A / Class FA at 1 GHz for deployments up to 10 Gigabit Ethernet. It works as a two-unit set, a main tester and a remote, with interchangeable link interface adapters for permanent link and channel configurations.

The Versiv platform uses the ProjX job management system and the Taptive touchscreen interface, giving autotest results, wire map, insertion loss, NEXT and return loss readings plus diagnostic analyzers for locating faults. Typical users are structured cabling installers, data center technicians and network maintenance teams.

Specifications

BrandFLUKE
MPNDSX-5000
ModelDSX-5000
TypeCopper Cable Certifier / CableAnalyzer
Product FamilyVersiv
Maximum Test Frequency1000 MHz
Supported CablingCat 5e, Cat 6, Cat 6A, Class FA twisted pair
InterfaceRJ45 link interface adapters, USB Type A, Micro-AB USB
Power SupplyLi-ion battery pack or AC adapter
Country/Region of ManufactureUnited States

We ship worldwide from Japan by DHL / FedEx express with a tracking number on every order.

  • Orders are dispatched Monday to Friday. Weekends and Japanese public holidays are not available because the carriers are closed.
  • We can only ship to the address registered on eBay. If you need a different address, please update it on eBay before ordering.
  • Every item is professionally packed with double-wall boxes and cushioning. Sensitive equipment is packed in anti-static material.
  • We do not mark merchandise values below value or mark items as gifts. Japanese, U.S. and international regulations prohibit this.

For buyers in the United States: This item is shipped with duties unpaid (DDU). However, because this product originates from the United States, no additional U.S. import tariff applies — you will not be charged any extra duties or fees upon delivery.

For buyers outside the United States: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

Important - if a DDU shipment is returned to us: When an item ships with duties unpaid (DDU), the carrier will contact you to collect import charges and any clearance documents required. Please respond promptly. If the shipment cannot be delivered and is returned to us because import charges were left unpaid, or because the carrier's requests went unanswered, eBay's Money Back Guarantee does not cover an order that could not be delivered for these reasons. In that case we will refund the item price once the returned item reaches us, less the actual round-trip shipping and any return or customs charges billed to us by the carrier (at cost, documented). Please make sure you are able to receive the shipment before buying.

Returns are accepted under the return policy shown at the top of this listing, and every order is covered by eBay Money Back Guarantee.

  • If anything is wrong with your order, please message us first — we answer every message and will work with you until it is resolved.
  • Any damage caused in transit should be reported within 3 days of delivery, with photos of the item and the outer box.
  • Returned items must include all accessories and the original packaging.

We are a Japanese company specialising in used equipment sourced within Japan. Every unit is received, inspected and photographed by our own team in Niigata before it is listed — the photos in this listing are of the actual item you will receive.

Japanese equipment is typically kept in careful condition, and we describe exactly what we find, including any faults. If you have a question about this item or are looking for something we do not currently list, please feel free to contact us.

Inspected In-House

Checked and photographed by our own technicians before listing. What we find is what we write.

Packed for Transit

Double-wall boxes, cushioning and anti-static material for sensitive equipment.

Tracked Worldwide

DHL / FedEx express from Japan with a tracking number on every single order.