Kopul Studio Elite 4000 Series XLR Microphone Cable, 15 ft, with Neutrik Connectors (M4015)
Studio and broadcast grade balanced mic cable. Genuine Neutrik XX connectors • 98% braided copper shield • Twin conductive PVC inner shields • 24 AWG OFC • Made in Hungary • 3-year warranty.
Condition: New. Never used. Still zip-tied to the original Kopul retail hang card with both connectors still sealed in their factory plastic sleeves. The card itself may show minor shelf wear, as shown in the photos. The cable has not been unwrapped, plugged in or coiled by hand.
The Connectors Are the Headline
These are genuine Neutrik XX series connectors, made in Liechtenstein. Not a Neutrik-style copy, not the budget Rean line, and not an unbranded shell. Neutrik XX is the connector working engineers specify by name, with a caged contact design and improved ground contact that mates cleanly and keeps mating cleanly after years of patching.
This matters more than the wire does. Connectors are where mic cables actually fail. A cable with a good jacket and a cheap shell will go intermittent at the worst possible moment, and the whole point of buying a known connector brand is that you stop thinking about it.
Where Studio Elite Sits in the Line
Kopul publishes its own tier comparison right on the package. Studio Elite is the second-highest of four, and the highest of the standard two-conductor cables:
| Series |
Shield Type |
Coverage |
Connector |
Solder Points Wrapped |
| Premier QuadPro |
Braid |
99% |
Neutrik XX gold |
Yes |
| Studio Elite (this cable) |
Braid |
98% |
Neutrik XX silver |
Yes |
| Premium Performance |
Dual spiral |
95% |
Neutrik XX silver |
Yes |
| Performance |
Dual spiral |
92% |
Rean |
No |
The jump from dual spiral to a true braided shield is the meaningful one. Spiral shields open gaps when the cable flexes. A braid holds its coverage while it moves, which is exactly what you want in a cable that gets coiled and uncoiled constantly.
How It's Built
- 98% braided copper shield for EMI and RFI rejection
- Twin conductive PVC inner shields for 100% coverage underneath the braid
- 24 AWG oxygen-free stranded copper conductors with PE insulation
- Cotton yarn filler to reduce electrostatic and microphonic noise, the handling rustle you hear through a cheap cable when someone bumps it
- Shrink-wrapped solder points inside each connector, so the joints are protected rather than bare
- Neutrik XX silver contacts with caged contact design and improved ground contact
Specifications
| Brand | Kopul (Gradus Group) |
| Model | M4015 |
| Series | Studio Elite 4000 Series |
| Connectors | XLR male to XLR female, 3-pin, Neutrik XX silver |
| Length | 15 ft (4.5 m) |
| Conductors | 2 x 24 AWG oxygen-free stranded copper |
| Shield | 98% braided copper, plus twin conductive PVC inner shields |
| Insulation | PE, with cotton yarn filler |
| Color | Black |
| Cable Made In | Hungary |
| Connectors Made In | Liechtenstein |
| Compliance | CE, RoHS |
| Warranty | Kopul three-year limited warranty |
| UPC | 847628551183 |
What's Included
- 1 × Kopul M4015 Studio Elite 4000 Series XLR cable, 15 ft, black
- Original Kopul retail hang card
Why This Cable
- Neutrik connectors at a fraction of the usual cost. Cables with genuine Neutrik ends from the name-brand players routinely run more than this. Kopul puts the same connectors on and skips the marketing budget.
- Braided shield, not spiral. The single biggest construction difference between a cable that stays quiet and one that picks up hum when you move it.
- Built for the room, not the shelf. Cotton yarn filler and wrapped solder joints are details that only matter once a cable has been coiled a few hundred times. That is when cheap cables start crackling.
- Fifteen feet is the workhorse length. Long enough to reach a vocal booth, a drum kit or across a small stage. Short enough not to become a coil of slack under the desk.
- Hungarian-made cable, Liechtenstein connectors. European manufacture throughout, which is unusual at this price point.
- Three-year warranty from Kopul, printed on the card.
Before You Buy
- Standard 3-pin XLR male to female. The usual microphone and balanced line orientation. Male end to the mixer or interface input, female end to the microphone.
- Two-conductor, not star-quad. Star-quad is the Premier QuadPro series. For nearly all studio and stage use, two-conductor with a 98% braid is exactly right.
- It is a balanced analog cable. It will also pass AES/EBU digital and DMX in a pinch, but purpose-built cable is the better choice for those if you need long runs.
- Packaging may show shelf wear. The cable itself is untouched and still factory-sealed at both connectors. Photos show the actual item.
- Sold as-is with no returns. New and unused, but please ask any questions before buying.
Shipping & Returns
Ships free with either UPS Ground or USPS Ground Advantage, packed carefully for transit. Please see the returns panel above for the return window on this listing. Questions before you buy? Send a message and we will get right back to you.