Vintage Ducon Stacked Dual-Concentric Potentiometer
200K Linear / 500KΩ Tapped Control | Integrated 4-Tag DPST Switch | Vintage NOS Unit #2
👨🛠️ Bench Verification & Technical Condition
Up for sale is a rare, premium New Old Stock (NOS) vintage late 1960s / early 1970s Ducon Australian-Made coaxial dual-concentric potentiometer with a built-in heavy-duty safety power switch. This highly specialized component features a stacked independent shaft layout, allowing two stacked control knobs to operate entirely distinct circuit paths out of a single mounting hole, while the initial turn acts as the system safety power toggle. Perfect for deep wooden console faceplates or deep-chassis configurations. This is Unit #2 (featuring exceptionally tight benchmark tolerances).
- Coaxial Dual-Concentric Design: Features an outer independent 7mm round brass sleeve (with slots/keyway) controlling the front section and an inner 4.9mm brass shaft with a flattened D-edge passing straight through to actuate the rear resistive track independently. The front shaft extension measures 62mm (72mm total including the threaded mounting collar) and can be cut down to size if needed.
- Massive Component Profile: This unit features a total length of 110mm measuring from the very rear tip of the switch contact tags right up to the front edge of the inner D-shaft tip.
- Integrated 4-Contact DPST Power Switch: The rear phenolic plate features a robust 4-tag Double-Pole Single-Throw switch rated safely at 2A 250V. It simultaneously isolates or connects both lines of your power path for maximum safety in high-voltage valve equipment. Clicks firmly past the counter-clockwise detent.
- Verified Bench Diagnostics: Directly swept and verified with a digital multimeter to guarantee smooth continuity and confirm authentic legacy era-specific operational curves:
🔹 FRONT POT (Legacy Stamp 200KA-40814 - Unit #2):
• Total Track Resistance (Pins 1 to 3): 216.1 kΩ Max (0.2 Ω Minimum Floor)
• 50% Mechanical Midpoint: Registers an incredibly tight, near-perfect split at 110.0 kΩ (Linear Taper)
🔹 REAR POT (Legacy Stamp 500KT40K - Unit #2):
• Total Track Resistance (Pins 1 to 3): 716.5 kΩ Max (0.2 Ω Minimum Floor)
• 50% Mechanical Midpoint: Registers an authentic vintage Log/Audio sweep at 82.0 kΩ
• Integrated Loudness Tap (Pins 1 to 4): Sits cleanly at 65.5 kΩ (Aligning with a premium contour filter tap)
🔹 INTEGRATED SAFETY ROTARY SWITCH:
• Configuration: Heavy-Duty 4-Terminal DPST (Double Pole Single Throw / Rated 2A 250V)
• Operation: Clockwise rotation past detent closes/shorts independent poles (1-2 and 3-4) simultaneously
📊 Stamped Component Specifications
| Brand / Manufacturer | Ducon (Made in Australia) |
| Front Casing Stamp | 214-DUCON-200KA-40814 (216.1 kΩ Measured Total) |
| Rear Casing Stamp | 214-DUCON-500KT40K (716.5 kΩ Measured Total) |
| Architecture Layout | Dual-Ganged Concentric Independent Potentiometers + Rear Safety Switch |
| Taper Profiles (Legacy System) | Front Track: "A" Linear Curve Profile | Rear Track: "T" Tapped Audio Log Profile |
| Integrated Switch Specification | Heavy-Duty 4-Contact DPST Power Switch Assembly (2A 250V) |
| Terminal Architecture | 3-Pin Lugs (Front) | 4-Pin Array with Loudness Tap (Rear) | 4 Switch Tags |
| Total Shaft Dimensions | 62mm Visible Shaft Length (72mm Including Threaded Mounting Collar) |
| Total Component Profile | 110mm Total Depth (From switch tag edge to front inner shaft tip) |
| Shaft Diameters & Material | Solid Brass | Outer Sleeve: 7mm Round Slotted | Inner Shaft: 4.9mm D-Shaft |
| Era & Origin / Condition | Classic Vintage Stock | Made in Australia | New Old Stock (NOS) |
📻 Historic Radio, TV & Guitar Amplifier Restoration Focus
This highly specific hybrid dual-value coaxial component is crucial for period-correct bench work:
- Vintage Audio Gear & Guitar Amplifiers: Known compatible match and excellent restoration stock replacement for vintage Australian and international gear, including classic **Diason, Peavey, Astor, and AWA** valve layouts.
- Classic Valve Radios & Early TVs: Highly targeted for dual circuit adjustments running out of a single faceplate opening while managing safe, isolated high-voltage dual-pole power entries.
- Preservation of Factory Performance: Bypassing a dedicated loudness tap with a standard modern 3-pin control permanently kills the amplifier's factory loudness contour circuitry. This original replacement part fully preserves the authentic audio signature.
📮 Combined Shipping Policy
Clearing out multiple vintage assets from your workspace project bins? I will gladly manually combine shipping costs across all active listings to save you money on postage. Please add your items to your cart and request a final total before making your payment so I can issue an adjusted invoice based on the true package size and weight.
⚠️ Vintage Electronics Disclaimer
This item is a premium New Old Stock (NOS) component from an accumulation of classic workshop stock. While it has been cleanly bench-tested to confirm precise track resistance, switch continuity, and smooth tracking, vintage electrical hardware components are sold as-is without modern commercial warranties. Please review all dimensions and chassis shaft profiles closely before purchasing.