Brighten up your bathroom with this fun and quirky Glow in the Dark Light Bulb Light Pull Cord Handle!
Designed to resemble a miniature light bulb, this novelty pull handle adds a playful finishing touch to an ordinary bathroom light cord. Its glow-in-the-dark material absorbs light and glows when the room becomes dark, making it a fun and practical decorative accessory.
The light bulb can also be used as a decorative blind pull cord handle on compatible blind cords.
Featuring a grey screw-on cap, the design allows your existing cord to be threaded through the cap and secured with a knot. The cap then screws into the bulb, neatly concealing the knot inside.
Please note: Pull cord is NOT included.
Give your bathroom a unique finishing touch with this miniature glowing light bulb.
Made using glow-in-the-dark 3D printing material, the bulb absorbs light and gradually releases it in the dark.
Once charged, it creates a glowing light bulb effect without batteries, wiring or electricity.
Perfect for anyone who loves novelty home accessories, unusual bathroom décor or glow-in-the-dark products.
Important: light exposure is required to charge the bulb for its full glow effect.
The brightness and duration of the glow will vary depending on the intensity and duration of light exposure..
Replace a standard bathroom pull handle with something a little different!
This glow in the dark light bulb light pull is suitable for compatible pull-cord lighting in:
Bathrooms
Toilets and WCs
En-suites
Bedrooms
Utility rooms
Other suitable rooms with pull-cord lighting
Its miniature light bulb design is particularly appropriate for a light switch pull cord.
After charging, the glowing material can also make the handle easier to locate in a dark room.
This novelty light bulb can also be used as a decorative handle on a compatible blind pull cord.
Ideal for adding character to suitable blinds in bedrooms, kitchens, home offices and other rooms.
Please check compatibility with your existing blind cord and mechanism before fitting. Do not alter or bypass any blind-cord safety device. Keep blind cords safely secured and out of children's reach.
The light bulb features a clever two-part screw-together design.
The grey cap separates from the bulb, allowing the cord to be threaded through and secured before the two parts are screwed together.
Unscrew the grey cap from the light bulb.
Thread your existing pull cord through the hole in the grey cap
Tie a secure knot in the end of the cord.
Position the knot inside the bulb's internal recess.
Screw the grey cap securely back into the bulb, enclosing the knot inside.
Check that the cap is securely attached and the cord is firmly retained before use.
The concealed knot creates a neat finish without an exposed knot hanging beneath the handle.
No separate connector is required.
Please ensure your existing cord is suitable for the fitting.
Height: 5cm
Width: 3cm
Compact and easy to incorporate into your existing bathroom or blind setup.
Please allow for minor measurement variations.
💡 Novelty miniature light bulb design
🌟 Glow-in-the-dark material
🚿 Decorative bathroom light pull handle
🪟 Can also be used as a compatible blind pull handle
🔧 Two-part screw-together construction
🩶 Grey screw-on cap
🧵 Thread-through cord fitting
✨ Concealed securing knot
🔋 No batteries required for the glow effect
📏 Approximately 5cm high × 3cm wide
🖨️ 3D printed
🇬🇧 Designed and made in the UK
🎁 Fun novelty gift idea
❌ Pull cord not included
Looking for an unusual little gift for someone who enjoys quirky home accessories?
This glow-in-the-dark light bulb pull handle is a fun choice for anyone who likes creative bathroom décor, lighting-themed accessories or glow-in-the-dark products.
It makes a great novelty gift, stocking filler or small housewarming present.
The light bulb shape is particularly fitting for a bathroom light pull, turning an everyday household item into a conversation piece.
This item is 3D printed.
Due to the nature of the 3D printing process, fine layer lines or print lines may be visible on the finished product.
Slight variations in colour and surface finish may also occur between individual items.
The actual colour may vary slightly from the product photographs due to the printing material, manufacturing process, photography, lighting and individual screen settings.
These minor variations are normal characteristics of 3D-printed products.
This Glow in the Dark Light Bulb Light Pull & Blind Pull Cord Handle is designed and made in the UK.
You will receive:
1 × Glow in the Dark Light Bulb Pull Handle, comprising the bulb and grey screw-on cap.
Pull cord is NOT included.
Any cord shown in product photographs is for demonstration purposes only.
💡 Add a little glow to your bathroom with this quirky Glow in the Dark Light Bulb Pull Handle!