Product Description

This item located in Germany and only ship to some European Countries.

If you need to return the item for some reasons, pls contact us via ebay message at the fist time, we will try our best to help you and arrange the return for you. Pls do not send back directly without permission.Thank you!!!


LAUNCH X431 O2-2 Oscilloscope Scopebox Analizador 4 Channel Digital Scopebox Tester USB Port Works with X431 PAD VII, PAD V, PAD III 

Featuring a new design and upgraded hardware, the LAUNCH O2-2 Scopebox is a versatile and easy to use add-on module that can detects high level faults on various electrical components, such as sensors, acturators and circuits. By integrating with the X-431 series scan tools via O2-2 application, it delivers accurate and conclusive diagnostic faults that enable the shop and technician to enlarge their scan tool's functionality.

O2-2 Highligts:
1. Channels 4
2. Bandwidth 100 MHz
3. Rasing time less than 3.5 ns (typical)
4. 1-year Warranty. 24 Hours NON-STOP Hassle-Free Technic Support
5. LAUNCH Electrical analyzer (oscilloscope) is stable, durable, and portable. 
6. Features the ability to record and play back high-resolution waveform data for future analysis;
7. By integrating with the X-431 series scan tools via the O2-2 application, it delivers accurate and conclusive diagnostic faults 
8. LAUNCH O2-2 Scopebox can detect high-level faults on various electrical components, such as sensors, acturators and circuits.
9. One-click enable function allows users to capture a particular waveform making the process 70% more efficient compared to other oscilloscopes.
10. Support with X-431 series scan tools and V5.0 new version tools:

- Offline Model: X431 pro3 link, X431 Throttle, X431 Pad II AE, X431 Torque, X431 Turbo
- Online PRO Series Model:  X431 Pros Star, PROs Elite/PRO ELITE, X431 PRO (V 5.0, PROS V5.0), X431 V+ V5.0, X431 Pro3S+ V5.0, X431 PRO3 APEX, X-431 PRO3 ACE, X-431 PRO3 (V+) ELITE, X-431 PRO5 SmartLink
- PAD Series Model: X-431 PAD V ELITE, X-431 PAD VII ELITE,
- IMMO Series Model: X431 IMMO Elite, X431 IMMO PLUS 

NOTE: DO NOT SUPPORT old version PRO5, CRP919X BT/CRP919E BT, PRO3S+ V2.0, V+ 2.0 or V+4.0.
If you are not sure if your device is supported, please feel free to contact us with your serial number.

Features of Launch O2-S2 Scopebox:

  • One key enable function

  • Access to 23 variants of automatic measurements that are displayed on one screen for an easy switch.

  • Buffer memory up to 50M.

  • Use the zoom in/out feature to review precise details

  • Customizable personal system settings that can be saved as configuration files for viewing

  • Self-calibration function allows optimization of the oscilloscope signal path for maximum measurement accuracy.

  • Magnifies waveform math operations, such as addition, subtraction, multiplication and FFT function for high level waveform analysis.

  • Multiple automotive tests that include circuits, sensors, actuators, ignition tests and more.

  • Multi-language user interface.

  • USB Sync Data Transfer to external devices such as laptop, tablet, etc....

LAUNCH X431 O2-2 Oscilloscope
LAUNCH X431 O2-2 Scope Box Functions:
1. Supports multiple vehicle preset project tests
Supports a variety of automotive preset project tests, such as circuits, sensors, actuators, ignition tests, communication tests and combination tests, and presets various parameters and specific connection methods for each test.

2. 23 automatic measurement settings
23 automatic measurement settings are displayed on one screen, which is clear at a glance and can be clicked with a light touch. It supports one-click clearing, eliminating the tediousness of turning pages and searching multiple times, making automatic measurement easy to use and convenient.

3. Quick trigger source switching
Supports edge, pulse, and other triggers. Simple and intuitive trigger settings and fast trigger source switching methods make the most difficult part of oscilloscope application extremely easy.

4. Quickly create waveform preset parameters with one click
When testing waveforms, you can save the existing settings on the current interface as waveform preset parameters with one click. When testing similar waveforms later, you can directly load the preset parameters without repeated settings.

5. Quickly save waveforms with one click
Quickly save the waveform currently displayed on the screen with one click and automatically save it in the specified format. It can be directly used as a reference channel waveform for display later.

6. Convenient cursor operation
Turn on the horizontal and vertical cursors with one click respectively. Each cursor can be dragged independently, and cursor tracking is also directly implemented through simple highlight touches, improving overall efficiency by more than 80%.

7. Support cursor/phase ruler changes accordingly
When the waveform is zoomed in/out, the cursor and phase scale can change accordingly, keeping the measurement range unchanged.

8. Supports 2-point touch, the waveform can be zoomed in or out vertically or horizontally
Drag horizontally or vertically with 2 points to zoom in or out the waveform horizontally or vertically.

9. Support demonstration function
Preset sine waveforms to demonstrate common functions without connecting an oscilloscope.

10. Supports waveform math operations
Supports addition, subtraction, multiplication, and division calculations of two-channel waveforms, in addition to fast Fourier transform.

Detailed Comparison Between Launch O2-2 Scope Box and Launch O2-1 Scope Box :

Model

O2-1

O2-2

Channel

4

4

Bandwith

100MHz

100MHz

Rise Time

≀3.5ns(typical)

≀3.5ns

Maximum sampling rate

1Gbps(for four channels)

1Gbps

Input resistance

1MΩ±1.5%

1MΩ±1.5%

Storage depth

50M

10M

Number of sampling bits

8bit

8bit

vertical accuracy

3%

3%

Vertical gear

5mV~10V

5mV~10V

Inverting

Support

Support

Channel coupled

DC, AC

DC, AC

Time base gear

5ns~1ks 

1ns-1ks

Time base accuracy

20ppm

20ppm

Sampling mode

Normal

Normal

CANBus decoding

CAN, LIN

CAN, LIN

Trigger type

Edge, Pulse width

Edge, Pulse width

Trigger mode

Normal, Auto and Single SEQ

Normal, Auto and Single SEQ

Trigger coupling

DC, Noise rejection

DC, Noise rejection

Math

Double wave\FFT

Double wave\FFT

Display

YT、Zoom、Roll

YT、Zoom、Roll

Roll mode

200ms/div~1000s/div

200ms/div~1000s/div

Auto configuration

Support

Support

Auto measurement

23

23

Cursor

Horizontal cursor, Vertical cursor

Horizontal cursor, Vertical cursor

Powered by

USB port, DC IN port

USB port, DC IN port

Data transmission method

USB

USB

Vehicle configuration options

Circuits, sensor, actuators, ignition

Circuits, sensor, actuators, ignition

Operating temperature

0℃~50℃

0℃~50℃

Power supply range

USB:5V/1A
DC:12V/24V

USB:5V/1A
DC:12V/24V

Compatibility

Different tablet resolutions require different APPs

One APP can be compatible with multiple tablet resolutions

Multi-touch gestures

No

Supports 2-point touch, the waveform can be zoomed in or out vertically or horizontally

Vehicle configuration

No

Each test project can support online help documentation (help documentation will be compiled according to needs later)

Firmware upgrade

Manual upgrade

Support online upgrade

Trigger

Waveform observation cannot be expanded during normal trigger waiting.

Can be used normally during normal trigger waiting.

Demo function

No

Yes

Split-screen

No

Yes

Sampling rate

Single channel 1G/s, more than 2 channels only 250M/s

Single channel 1G/s, 2 channels 500M/s, multiple channels 250M/s

Start time

2-3S

about 16s

Power consumption

about 6W

about 7.5W


How to Connect the Cables?
Different application scenarios require different connection methods (no matter which application scenario, the following connections are required)

1. power the oscilloscope box through the double-clip power cable: Connect one end of the double-clip power cable to the power interface of the oscilloscope box, and the other end to the vehicle battery to draw power (red is connected to the positive pole, black is connected to the negative pole).
Note: * PADVII series tablets support USB power supply.
2. Connect the Type B terminal of the USB cable to the Type B interface of the oscilloscope, and connect the other end to the USB interface of the diagnostic device.

Package Includes:
1pc x Launch O2-2 main unit

4pcs x HT 30 test lines

1pc x HT25 secondary ignition pick-up line

1pc x battery clip cable

1pc x USB cable

2pcs x HT201 attenuator

20pcs x piercing needles

2 pairs x multimeter probes

2 pairs x crocodile clips

5pcs x colored 4 female probes

4pcs x clipper fuses(5*20mm)

2pcs x screw head

1pc x user manual

1pc x color label

1pc x packing list
LAUNCH X431 O2-2 Electrical analyzer oscilloscope

We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. 

Please contact us if you need to use another method to pay.

Payment should be made within 7 days after bidding ends.

Otherwise a Unpaid Item case will be opened to you.

We are not responsible for buyers’ local taxes.

Please include your special requests in eBay note if there is any.

Order will be shipped within 1 business day after payment confirmed.

We have warehouse in Germany, From our Germany warehouse via DHL shipping.

Delivery time varies from 2 to 8 business days.

We will ship according to your eBay address.

Please make sure it is correct and include phone number for delivery.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Please include your special requests in eBay note if there is any.

Return Policy

Please return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.


We are authorize distributor, our all items are 100% original and Our devices have warranty,

1 Year free repair for the devices.


Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us as soon as possible and keep it unused.

We will instruct you on how to return and get refund or replacement.

If the item has been used, we have the right to decline your claim.

Items should be returned on buyers' cost for repair or replacement.

 Who We Are?

We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics for more than 10 years.

We are authorized distributor of GODIAG,XHORSE,AUTEL,LAUNCH,OBDSTAR brands, and more brands will be show in our store in near future.

What Do We Have?

We have warehouse in China US UK Czech Germany to ensure fast shipment and after-sale service.

We have more than 100 employees devoting to customer satisfaction.

If you have any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.

our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)

Please leave us Positive FeedbackPositive feedback rating and 5-stars★★★★★after you received our package if you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.

Payment

We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. 

Please contact us if you need to use another method to pay.

Payment should be made within 7 days after bidding ends.

Otherwise a Unpaid Item case will be opened to you.

We are not responsible for buyers’ local taxes.

Please include your special requests in eBay note if there is any.

Delivery details

Order will be shipped within 1 business day after payment confirmed.

We have warehouse in Germany, From our Germany warehouse via DHL shipping.

Delivery time varies from 2 to 8 business days.

We will ship according to your eBay address.

Please make sure it is correct and include phone number for delivery.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Please include your special requests in eBay note if there is any.

Terms of sales

Return Policy

Please return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.


We are authorize distributor, our all items are 100% original and Our devices have warranty,

1 Year free repair for the devices.


Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us as soon as possible and keep it unused.

We will instruct you on how to return and get refund or replacement.

If the item has been used, we have the right to decline your claim.

Items should be returned on buyers' cost for repair or replacement.

About us

 Who We Are?

We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics for more than 10 years.

We are authorized distributor of GODIAG,XHORSE,AUTEL,LAUNCH,OBDSTAR brands, and more brands will be show in our store in near future.

What Do We Have?

We have warehouse in China US UK Czech Germany to ensure fast shipment and after-sale service.

We have more than 100 employees devoting to customer satisfaction.

Contact us

If you have any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.

our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)

Please leave us Positive FeedbackPositive feedback rating and 5-stars★★★★★after you received our package if you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.