🚿 Tap Tops Modern Acrylic - Hot & Cold Pair (2 Tap Heads) 🚿

Tap heads, tap handles, tap top covers, hot and cold tap knobs, basin sink bath tap conversion set

📦 Pack Of 2 🔴🔵 Hot & Cold Rings 🔧 ½" & ¾" Sizes ✨ Clear Acrylic ⚡ Fits From Above 🆕 Sealed Blister Pack

A brand new, unopened pair of Tap Tops in the Modern Acrylic style - clear acrylic replacement tap heads with one red and one blue indicator ring so you get a matched hot and cold tap handle set. If your existing basin, sink or bath tap heads are cracked, discoloured, stiff or spinning loose, these smarten the taps up without a plumber. The card states they are designed to be quickly fitted from above without disturbing the plumbing below and that they fit most basin, sink and bath taps, with ½" and ¾" shown on the pack.

📦 What You Get

✅ 2 x clear acrylic tap tops - one red (hot) indicator ring and one blue (cold) indicator ring
✅ Brass conversion collars and rubber seals as pictured in the upper blister section
✅ Fitting instructions and an exploded fitting diagram printed on the backing card
✅ Supplied in the original sealed blister pack, code 22W15 printed on the reverse

💡 Why Choose This?

🔴🔵 Hot and cold marked - red and blue rings so everyone knows which tap is which
👐 Chunky fluted grip - the ribbed acrylic body is easy to turn with wet or soapy hands
🔧 Two sizes covered - ½" and ¾" are shown on the pack with conversion parts included
⚡ Top-down fitting - the maker says they fit from above with no need to touch the pipework
✨ Clear acrylic finish - a clean modern look that suits chrome basin, sink and bath taps
💷 Sold as a pair - one purchase does both taps, far cheaper than replacing the whole tap

📋 How To Use

Read the fitting instructions printed on the back of the card before you start.
Prise off the old hot or cold indicator disc and undo the retaining screw underneath.
Lift the tired old tap head off the spindle, leaving the tap body in place.
Select the correct conversion collar for your ½" or ¾" tap and fit it as shown in the diagram.
Drop the new acrylic tap top on, secure the screw, then press in the red ring for hot and the blue ring for cold.

⚠️ Check the size of your existing tap head before ordering, and do not overtighten - acrylic can crack if forced. Follow the manufacturer's fitting instructions on the card.

✔️ Compatible With

The manufacturer states these fit most basin, sink and bath taps, with ½" and ¾" sizing shown on the pack. Typical uses include bathroom basin pillar taps, cloakroom and toilet hand basin taps, kitchen sink pillar taps, bath taps and utility room taps with traditional screw-down headworks and an old crutch, capstan or dome style tap head. Not intended for single-lever mixer taps. If you are unsure, compare your existing tap head and spindle with the photographs before buying.