Granville Electro Connector is a silver based, do it yourself

electrical repair kit specifically designed to repair broken rear

window demisters. It will also repair printed circuit boards, radio

antenna connections, alarm systems and other low voltage

electrical installations.

NB - This product will not bond electric contacts to the windscreen

glass.

* Restores broken heated rear window elements

* Elminates the need for expensive replacement glass

* Can be used on low voltage printed circuit boards

PRODUCT USAGE

Granville Electro Connector has been specifically developed for the

repair of automotive rear window demisters.

Shake the container thoroughly for about 30 seconds to ensure it is

properly mixed.

Affix the masking template provided to the area to be repaired

using a small amount of masking tape.

Apply the product using the brush provided to the area to be

repaired.

Leave for about 25-30 minutes then re-mix the container and apply

a further coat of paint.

Allow a minimum of 5 hours drying time before attempting to use

the window demister.

Do not paint over existing element, Electro connector should only

be used to fill the gap between broken elements.

The container is 20-25% full to ensure thorough mixing by shaking.

Store in a cool dry area between 5°C and 30°C out of direct sunlight.

1 year from date of manufacture in unopened container

Appearance : Silver coloured thixotropic liquid

Odour : Characteristic

Solubility : Insoluble in water

Flammability : Flammable

VOC : VOC in g/l 2004/42/II1(i):600g/l(2007)/500g/l(2010). Product contains 400g/l