Features:

for SA6 is a simple portable for Spectrum analyzer and signal range designed to display the signal for Spectrum in the for frequency range of 35 to 6200 .

The analyzer identifies the amplitude and for frequency of the spectral components of the analyzed process. for Spectrum analyzers can process signals from all widely used technologies: for Wi Fi, 2G, for 3G, 4G, LTE, for CDMA, for DCS, for GSM, GPRS, for GLONASS, .

Another important feature is the additional function of the tracking generator, which makes it possible to measure the for frequency response of passive or active devices such as or amplifiers. This software allows for measuring SWR and return loss modules. This requires an external directional coupler and a set of calibration measures.

for SA6 is mainly used for on-site s. This device is , lightweight, and in consumption. It enables the for service center and maintenance team to conduct on-site HF analysis of debugging and repair work.

For example, you can use this device to perform the following actions:

Place the external on the base station

Quick analysis of RF environment

Check if the relay unit is working properly

Repair and adjustment of relays, generators, , .

Measure SWR when using an external directional coupler.

This device is controlled by of two for methods:

Through the buttons and on the device.

The data between the analyzer and the PC is transmitted through a USB cable.

All measurement data is displayed in real-time on the device or PC screen.

Material: Metal+Plastic

Color: Black

Specifications:

Display for frequency range: 356200MHz

Measurement for frequency range: 35-4500MHz

for dynamic range in the 35-3000 for frequency : 75 dB3000-4500 for dynamic range: 70 dB

for Maximum span: 6165MHz

Bandwidth: 200 kHz, fixed

Scan for frequencies above 100MHz: 700MHz/sec

Scan 100 :<0.25 seconds

Background noise up to 3000 :<-90 dBm

Background noise 3000-4500 :<-85 dBm

Background noise 4500-6200MHz:<-80 dBm

Wave impedance: 50 ohms

Standing wave ratio within the operating for frequency range:<1.5

Internal attenuator: 0-30dB

Error at attenuation up to 10dB: 2dB

10 to 20 dB attenuation error: 5 dB

20 to 30 dB attenuation error: 8 dB

Tracking generator output power: -15... -25 dBm

Accuracy within for dynamic range: for 2,0 dB

for Maximum input power of attenuator at 0dB: 10dBm for Maximum input power when attenuation is greater than 20dB:+20dBm

for Maximum input measurement signal:+10 dBm

for Maximum input DC voltage: 25 volts

for Maximum current consumption when operating with batteries: 450 mA

for Maximum current consumption when running from USB: 500 A (when charging) : 2500 mA Range time: 3 hours charging time:~5 hours

The package includes:

1* for Spectrum analyzer for SA6

for 2* for SMA- for SMA 30cm extension cable

1*Typc-USB 10cm data cable

1* for Stylus

1* for SMA-KK Pass

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.