Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Honda Civic | 2012 | DX, EX, LX Models |
| For Honda Civic | 2012 | EX-L; Coupe |
| For Honda Civic | 2013-2015 | LX with Manual Transmission |
| For Honda Civic | 2013-2015 | HF Models |
OE/Part number:
Front Brake Disc:31601,S-31601,S31601
Front Brake Pads:1578,D1578,P1578,D-1578,P-1578
Specification:
Condition: New
Placement on Vehicle: Front, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
- Brake Rotors
| Installation position | Front Dirver & Passenger Side |
| Material | G3000 Iron Alloy |
| Solid Or Vented Type Rotor | Vented |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 5+2+2 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 261.7 |
| Overall Height(mm) | 47.1 |
| Nominal Thickness(mm) | 21 |
| Bolt Diameter(mm) | 5-φ12.7 |
| Hub Holes Centering Diamete(mm) | 64.3 |
- Brake Pads
| Installation position | Front Dirver & Passenger Side |
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 137.8 (±0.3) |
| Inner Pad Height(mm) | 51.8 (±0.3) |
| Inner Pad Thickness(mm) | 15.4 (-0.5) |
| Outer Pad Width(mm) | 137.8 (±0.3) |
| Outer Pad Height(mm) | 51.8 (±0.3) |
| Outer Pad Thickness(mm) | 15.4 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Brake Rotors
4x Front Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.

OTHER ITEMS
>>you might also like
-
Aluminum Master Cylinder w/ Reservoir for Honda Civic 1.5L 1.6L 1988-1997
-
Air Injection Pump for Mercedes E63 AMG W212 6.3L V8 0001405985 0001407185
-
Engine Top Cover with Gasket for Nissan Sentra 2013-2015 1.8L 132643RC0A
-
Black Side View Mirror for GMC C/K Series 1988-1998 Manual GM1321177
-
7-Way Trailer Connector for Caravan Durango Dodge Ram 2500 4T1217 1998-2010
-
Turbocharger Actuator for Mercedes-Benz R-Class W204 W212 C E 350 CDi 6420901686
-
1xGear SL D30-4-27-LSD Helical Gear Limited Slip Differential For Jeep Ford
-
Expert Series Gooseneck Hitch for Dodge Ram 2500 3500 2019-2025 Complete
-
Starter Motor for AUDI A4 Quattro A6 V6 3.2L 17976N 0001108406 12V 10T LRS2208
-
7 Inch Black Foam Pad Heavy Duty Polishing Wax Polish Sealant Compound
-
4X Ignition Coils + 6X Spark Plugs For Chrysler Sebring 2.4L L4 2007-2010 UF557
-
AC A/C Condenser Aluminum For Honda CR-V 2.4L 2007-2011 3599 With Receiver Drier
