4pcs Front Ceramic Brake Pads Set for Toyota Camry 2002 2003 2004 2005 2006 D908
Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Lexus GS300 | 2006 | All Models |
| For Lexus IS250 | 2009-2013 | for vehicles with front caliper casting # 60-32 |
| For Lexus IS250 | 2014-2015 | C; for vehicles with front caliper casting # 60-32 |
| For Toyota Camry | 2002-2004 | All Models |
| For Toyota Camry | 2005-2006 | L4; V6 for vehicle with 10.83 inch (275mm) Front Rotor |
OE/Part number:
P908,P-908,D908,908
Specification:
| Installation position | Front Dirver & Passenger Side |
|---|---|
| Condition | New |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | No |
| Pad Wear Sensor Type | / |
| Inner Pad Width(mm) | 131.57 (±0.3) |
| Inner Pad Height(mm) | 58.4 (±0.3) |
| Inner Pad Thickness(mm) | 16.7 (-0.5) |
| Outer Pad Width(mm) | 131.57 (±0.3) |
| Outer Pad Height(mm) | 58.4 (±0.3) |
| Outer Pad Thickness(mm) | 16.7 (-0.5) |
| Packaging Type | Box |
| Fitment | Direct Replacement |
* Products manufactured under an IATF 16949 quality management system
✔ AMECA- and NSF-tested brake pad solutions for the U.S. aftermarket
✔ Quality-checked components for consistent braking performance
✔ Designed for reliable aftermarket replacement applications
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Other items you might also like