Description：
AUTOOL AST605 Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment.The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.
Features：
1. [One-person Operation&Time Efficient]: AUTOOL AST605 Automotive Brake Fluid Bleeder can be operated by one person, four wheels oil can be exchanged together. Four pumps exchange oil simultaneously can save time and labor.
2. [Electric Brake Fluid Exchange]: No need to connect an air compressor. AUTOOL AST605 Automotive Brake Fluid Bleeder comes with a built-in working pressure pump. Brake fluid can be exchanged by simply connecting 110V/220V power supply.
3. [Smart adjustment panel design&Pressure Gauge]: One-press fluid exchange. Complete the oil exchange within one minute, conveniently and quickly. Pressure and frequency can be freely adjusted. Equipped with a pressure gauge to observe the fluid exchange pressure value.
Application:
Fit for European, American and Asian car models.
Mercedes-Benz, BMW, Volkswagen,Skoda, Volvo, Land Rover, Jaguar,
Bentley, Porsche, Buick, Chevrolet, Ford,Citroen, PEUGEOT , Chery, Changan,Mazda, BYD, Roewe,
Renault, Geely,ZHONGHUA, Great Wall Motor, MG,Lexus, Cadillac,Tesla,Ford,Audi,Peugeot,Toyata
Renault, Geely,ZHONGHUA, Great Wall Motor, MG,Lexus, Cadillac,Tesla,Ford,Audi,Peugeot,Toyata
Operation step:
Note: no need to start the vehicle for the operation.
1. Raise the car to a suitable height so the drive wheels are not on the ground.
2. Connect the four oil pots of the device to the car brake cylinder, and loosen the exhaust screw of the brake cylinder to ensure that oil flows out.
3. Pour in 2L new brake fluid from the fuel filler port of the equipment, and find the matching model connector to connect to the fuel filler of the brake master cylinder.
4. Connect to 12V car power and turn on the power switch button.
5. Press the Vacuum Switch button.
6. Press the Fuel Switch button to change the brake fluid.
7. During the oil changing process, look at the car brake oil tank mouth, if the refuel is too slow, press the acceleration switch button on the device to accelerate refueling; if it’s too fast, press the deceleration switch button to slow down.
8. After the oil change is completed, the used oil in the tank of the equipment must be drained clean. If it’s not emptied clean, the vacuum pump will be damaged and the oil change operation cannot be performed.
Technical Parameters:
Voltage: 110V/220V 50/60Hz;
Maximum power: 35W;
Maximum flow: 1.5 liters/min;
Working pressure: 0.7-2.5 bar;
Oil shortage protection: support;
Filling hose length: 3.5m;
Noise: ≦70dB;
Host size: 250×185×280mm;
Maximum power: 35W;
Maximum flow: 1.5 liters/min;
Working pressure: 0.7-2.5 bar;
Oil shortage protection: support;
Filling hose length: 3.5m;
Noise: ≦70dB;
Host size: 250×185×280mm;
Package Includes:
1* AUTOOL AST605 Automotive Brake Fluid Bleeder Main Unit
10 *Adapters
1* Fluid recycling bottle
1* User manual
