In good condition. Has minor wear from use. One of the rubber feet is missing. No drives are included. Please ensure hardware compatibility prior to purchase. Photos are of actual item. Serial number is logged and recorded on all sales.

Payment is required within 72 hours. Local pickup available in Phoenix. Please don't hesitate to contact us if you have any question. Thanks!

https://www.supermicro.com/en/products/system/midtower/5028/SYS-5028D-TN4T.php

Product SKUs
SYS-5028D-TN4T
  • SuperServer 5028D-TN4T (Black)
Motherboard

Super X10SDV-TLN4F
Processor/Cache
CPU
  • Intel® Xeon® processor D-1541
  • FCBGA 1667 supported
  • CPU TDP support 45W
  • System-on-Chip
System Memory
Memory Capacity
  • 4x DDR4 DIMM sockets
  • Supports up to 128GB DDR4 ECC RDIMM
  • Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type
  • 2400/2133/1600/1333MHz ECC DDR4 SDRAM
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors
      (using ECC memory)
On-Board Devices
SATA
  • SoC controller for SATA3 (6Gbps) ports
Network Controllers
  • Dual LAN via Intel® i350-AM2 Gigabit Ethernet
  • Dual LAN via SoC 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-T, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • BMC integrated ASPEED AST2400
Input / Output
SATA
  • 6x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (rear)
  • 2x USB 2.0 ports (front panel)
Serial Port
  • 1x COM port (header)
DOM
  • 1x SATA DOM (Disk on Module) power connector
VGA
  • 1x VGA Port
Others
  • TPM 2.0 header
Management
Software
  • Intel® Node Manager
  • IPMI (Intelligent Platform Management Interface) 2.0 with KVM support
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • SUM
Chassis
Form Factor
  • Mini Tower
Model
  • CSE-721TQ-250B
Dimensions and Weight
Height
  • 9.45" (240mm)
Width
  • 8.27" (210mm)
Depth
  • 11" (279mm)
Weight
  • Gross Weight: 15 lbs (6.8 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LEDs
  • System Overheat LED
Expansion Slots
PCI-E
  • 1x PCI-E 3.0 x16 (Low Profile) slot
  • 1x M.2 PCI-E 3.0 x4, M Key 2242/2280
Drive Bays
HDD
  • 4x 3.5" Hot-swap drive bays
  • 2x 2.5" internal drive bays
Peripheral
  • 1x slim DVD-ROM drive bay (shared with 1x 2.5" internal drive bay)
Power Supply
250W Flex ATX Multi-output Bronze Power Supply
AC Voltage
  • 100 - 240V, 50 - 60Hz
+5V
  • Max:14 Amp; Min:0.5 Amp
+12V
  • Max:18 Amp; Min:1 Amp @100V-240V
-12V
  • Max: 0.3 Amp
+3.3V
  • Max: 12 Amp Min: 0.3Amp
5VSB
  • Max: 2.5 Amp
Certification80 PLUS   Bronze Certified
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI UEFI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.7.1
  • UEFI
  • RTC (Real Time Clock) Wakeup
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       0°C to 40°C (32°F to 104°F)
  • Non-operating Temperature:
       -20°C to 60°C (-4°F to 140°F)
  • Operating Relative Humidity:
       10% to 85% (non-condensing)
  • Non-operating Relative Humidity:
       10% to 95% (non-condensing)