Motorcycle LED Light Strip Brake Turn Signal 12V Flexible Tail Lamp

Add a clear rear lighting point to a motorcycle, trail bike or off-road build with this flexible LED light strip. Designed for a 12V electrical system, it combines red brake and running light output with amber turn signal illumination in one slim fitting, making it suitable for use around the tail or number plate area.

The strip contains 48 surface-mounted LEDs in total: 32 red LEDs for brake and running functions, plus 16 amber LEDs for signalling. Red light is used for brake and stop operation, while amber light is used for the turn signals. The narrow body measures 20.5 x 1.3 x 0.8cm, allowing it to fit neatly where a compact rear light is required without taking up unnecessary space.

Installation is made straightforward by the pre-fitted double-sided adhesive tape. Clean and dry the chosen mounting surface, position the strip carefully, then connect the wires to the corresponding motorcycle circuits. The supplied cable is approximately 50cm long, providing useful reach for routing towards the wiring point.

Wiring functions are clearly separated: black is negative, red is for the red high-intensity light, white is for the red lower-intensity light, yellow is for the right amber signal and green is for the left amber signal. Please check your motorcycle wiring and local lighting regulations before fitting, and make sure all connections are insulated and secure.

The soft flexible strip has a black finish and is rated IP68 for ingress protection. It weighs approximately 0.028kg, so it adds very little load to the mounting area. Supplied as one light strip with attached wiring, it is a practical choice for replacing or adding compact rear brake, running and turn signal lighting on a compatible 12V motorcycle.