Provides enterprise-class battery backup and pure sine wave output for servers, switches, data storage

and other critical networking equipment.

This 5P rack-mount line-interactive UPS system provides reliable battery backup for small business,

education, retail, financial or healthcare networking components, including servers, VoIP phones, data

storage and PoE switches. The 5P1550GR protects connected devices by providing 20 percent more

wattage compared to traditional UPS systems.

Valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give

you enough time to safely save files and shut down your system in case of a prolonged blackout.

Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to

provide advanced notice when batteries need replacing.

The NETWORK-M2 Gigabit network card (sold separately) enables full remote configuration and

management, including load shedding, reboots of connected equipment and safe shutdowns. UPS

firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don’t

have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for

cybersecurity, which were developed to address the vulnerability of connected devices to known

malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe

Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities,

including temperature and humidity conditions.

Six C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor

power consumption down to the outlet group level. Three outlets are grouped into two load banks that let

you shed non-critical loads to extend runtime for critical loads.

The five-button graphical LCD provides useful information about the UPS itself, load status,

events, measurements and settings. To save energy, the LCD switches to the screen saver after five

minutes of inactivity. The backlight LCD automatically dims after 10 minutes of inactivity.

RS-232 and USB ports connect to a serial-enabled or USB-enabled device for a variety of communication

options (cables are included). The RPO/ROO connector permits emergency shutdown or remote restart of

all connected equipment. By adding the optional RELAY-MS interface card (sold separately), a drycontact relay port can be programmed through the LCD to provide reliable communications to automation

and industrial components.

You can mount the 5P1550GR in just 1U of space in an EIA-standard 19-inch rack using the included 4-

post rail kit or an optional 2-post rail kit (RK2PA, sold separately). You can also use the included hardware

for wall mounting. The C14 inlet accepts a detachable power cord that connects to a compatible AC outlet.