AUDAC BAE100 Bluetooth Antenna Extender Kit 7dBi Rackmount SMA (NEW Sealed)

The AUDAC BAE100 is a Bluetooth antenna extender kit for AUDAC commercial audio equipment. It relocates the Bluetooth antenna of a rack mounted AUDAC device out of the rack or enclosure, where the metalwork would otherwise block the signal, and mounts it somewhere with a clear path to the room. AUDAC lists it as suitable for the PRE116, PRE126, PRE220 and PRE240 preamplifiers and the BMP40 and BMP42 SourceCon Bluetooth modules.This is a passive kit. It contains no Bluetooth radio, no receiver and no audio circuitry, and it needs no power. The kit consists of a 7 dBi omnidirectional 2.4 GHz antenna on a reverse polarity SMA connector, two SMA extension cables of 1 metre and 5 metres, and a multifunctional bracket that mounts the antenna either in a single 19 inch rack space or on a wall or other surface.SpecificationsBrand: AUDACModel: BAE100 Bluetooth Extender KitPart Number: BAE100Product Type: Passive Bluetooth antenna extension kitFrequency Range: 2.4 GHz to 2.5 GHzAntenna Gain: 7.0 dBiPolar Pattern: OmnidirectionalImpedance: 50 ohmConnector: SMA straight plug, reverse polarity (RP-SMA)Antenna Dimensions: 12 mm diameter x 279 mm longCables Supplied: 1 m and 5 m SMA male to femaleMounting: Multifunctional bracket, 1 x 19 inch rack space or wall mountHousing Material: ABSWeight: 135 g including accessoriesPower: None, the kit is entirely passiveCompatibility: AUDAC PRE116, PRE126, PRE220, PRE240, BMP40 and BMP42Barcode: 5414795041516Condition: New, factory sealedKey Features Moves the Bluetooth antenna out of a metal rack to restore pairing range 7 dBi omnidirectional antenna covering the full 2.4 GHz band Two cable lengths supplied so the antenna can be placed close by or across the rack Bracket mounts in a single rack unit or directly to a wall Fully passive, no power supply and no configuration required Typical Applications AUDAC preamplifiers installed in a closed or metal equipment rack Bluetooth audio input points where users pair from across a room Ceiling or riser cupboard installations with poor RF line of sight Retail, hospitality and background music systems using AUDAC hardware Package Includes 1 x 7 dBi antenna, 279 mm, RP-SMA 1 x 1 m SMA male to female connection cable 1 x 5 m SMA male to female connection cable 1 x multifunctional mounting bracket for rack or wall No AUDAC amplifier, preamplifier or Bluetooth module is included Additional InformationPlease note this is an antenna extension kit, not a Bluetooth receiver and not a wall panel module. It has no radio and no audio path, and it does not add Bluetooth to a device that does not already have it. It extends the antenna of AUDAC equipment that already includes a Bluetooth radio.AUDAC does not publish a country of origin for this kit, so none is stated.The item is new in the manufacturer's original sealed packaging.Shipping from Sydney, Australia.

AUDAC BAE100 Bluetooth Antenna Extender Kit 7dBi Rackmount SMA (NEW Sealed)

This is a passive kit. It contains no Bluetooth radio, no receiver and no audio circuitry, and it needs no power. The kit consists of a 7 dBi omnidirectional 2.4 GHz antenna on a reverse polarity SMA connector, two SMA extension cables of 1 metre and 5 metres, and a multifunctional bracket that mounts the antenna either in a single 19 inch rack space or on a wall or other surface.

Specifications

Brand: AUDAC

Model: BAE100 Bluetooth Extender Kit

Part Number: BAE100

Product Type: Passive Bluetooth antenna extension kit

Frequency Range: 2.4 GHz to 2.5 GHz

Antenna Gain: 7.0 dBi

Polar Pattern: Omnidirectional

Impedance: 50 ohm

Connector: SMA straight plug, reverse polarity (RP-SMA)

Antenna Dimensions: 12 mm diameter x 279 mm long

Cables Supplied: 1 m and 5 m SMA male to female

Mounting: Multifunctional bracket, 1 x 19 inch rack space or wall mount

Housing Material: ABS

Weight: 135 g including accessories

Power: None, the kit is entirely passive

Compatibility: AUDAC PRE116, PRE126, PRE220, PRE240, BMP40 and BMP42

Barcode: 5414795041516

Condition: New, factory sealed

Key Features

Moves the Bluetooth antenna out of a metal rack to restore pairing range
7 dBi omnidirectional antenna covering the full 2.4 GHz band
Two cable lengths supplied so the antenna can be placed close by or across the rack
Bracket mounts in a single rack unit or directly to a wall
Fully passive, no power supply and no configuration required

Typical Applications

AUDAC preamplifiers installed in a closed or metal equipment rack
Bluetooth audio input points where users pair from across a room
Ceiling or riser cupboard installations with poor RF line of sight
Retail, hospitality and background music systems using AUDAC hardware

Package Includes

1 x 7 dBi antenna, 279 mm, RP-SMA
1 x 1 m SMA male to female connection cable
1 x 5 m SMA male to female connection cable
1 x multifunctional mounting bracket for rack or wall
No AUDAC amplifier, preamplifier or Bluetooth module is included

Additional Information

Please note this is an antenna extension kit, not a Bluetooth receiver and not a wall panel module. It has no radio and no audio path, and it does not add Bluetooth to a device that does not already have it. It extends the antenna of AUDAC equipment that already includes a Bluetooth radio.

AUDAC does not publish a country of origin for this kit, so none is stated.

The item is new in the manufacturer's original sealed packaging.

Shipping from Sydney, Australia.