Feature:

1. Powerful Bearing Design: The pneumatic air has dual bearing spindle, dual supporting points, with higher concentricity and strong force.
2. Accurate Drilling: The air adopts imported movement and fine machining, which makes the clamping and drilling more accurate and reliable.
3. With 3 Jaw Chuck: 3 jaw chuck design, thickened and hardened, support 360 degree strong bite, with clamping capacity of 1.5‑10mm.
4. Support CW and CCW: With CW and CCW switches, the pneumatic air is reversible and convenient for conversion.
5. Adjustable Speed: The free speed is 1400rpm, equipped with an air valve, and the speed can be adjusted at will.

Specification:

Item Type: Pneumatic Air
Model: KV-5110B
Material: Steel
Purpose: Drilling holes on wood, iron, aluminum, walls and other surfaces
Working Pressure: 0.6-0.8Mpa
Free Speed: 1400rpm
Air Inlet Size: 1/4in
Clamping Capacity: Approx. 1.5-10mm / 0.06-0.4in
Maximum Drilling Diameter: Approx. 10mm / 0.4in

Package List:

1 x Pneumatic

1 x Bit

1 x Hanging Ring

Note:

When in use, do not overload or idling at high speed to prevent premature wear of the machine. Lubricating oil must be injected from the inner hole of the connecting pipe 3‑4 time. If a secondary impact is found during use, the machine should be shut down for inspection immediately, and disassembly on site (referring to unclean places) is prohibited, and it should be sent to the repair department for inspection in time.