Features：

1. Built-in Air Pump Saves Time and Money:
ANCEL S3000 smoke machine automotive comes with tons of accessories that allow you to use it on just about any vehicle, unlike other EVAP smoke machines that you’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, ANCEL S3000 smoke machine automotive already has that feature built-in. So you’re saving some extra money!

2. Dual Testing Model:
ANCEL S3000 EVAP smoke machine come with a dual testing model including air mode and the smoke mode. Air Mode:Independent controlled built-air pump. Smoke Mode: Independent controlled smoke generator. These enable you detect the leaks precisely.

3. Instant Smoke Generation:
Press Smoke Control switch, the LED Indication would turn GREEN, and the car smoke tester start to generate smoke within seconds. One of the biggest hassles with the automotive smoke machines is the time of heating of the device. You won’t have to wait for the tester to warm up with ANCEL S3000 smoke machine automotive.

4. Overload Protection:
ANCEL S3000 automotive smoke machine leak detector has built in self-protective system:Overheat and Anti-frost Protection. When the temperature of the device exceeds 120℃, power protection will be intelligently activated to turn it off. The device can also work normally at -20℃. You don’t have to worry about switching on and off the machine constantly during diagnosis. The system takes care of the load for you.

5. Wide Compatibility:
ANCEL S3000 smoke machine automotive used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. The smoke machine automotive is suitable for all makes and models of cars.

6. Various System Test:
Crankcase System Test; Intake System Test; Car Sealing Test; Fuel Tank System Test; Turbo System Test; EVAP System Test; Exhaust System Test; Various Pipe Fittings Test. (Note: Not applicable to air conditioning system piping, Lamp housing) It can quick to find evap leaks.

7. Save Money by Using Baby Oil or Mineral Oil:
You don't need to buy expensive smoke oil. Use baby oil, Pure #5 white oil is the best choice if available. This makes ANCEL S3000 smoke machine automotive practically free to use forever!

Full System Diagnostics, Don't Miss Any Leaks.

▶Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.

▶Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.

▶Car Sealing Test: poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.

▶Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough

▶Turbo Test: the leakage of coolant would cause the engine to report high water temperature.

▶Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses.

▶EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling

▶Exhaust System Test: Uncleaned harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.

Specifications：
● Output pressure: 0.5-8 Bra
● Output flow:＜6L/min
● Power supply: DC12V,vehicle battery
● Air source: built-in
● Test oil capacity:10ml-20ml
● Material:Iron
● Length of Power Cord: 2.5Meters
● Length of Smoke Hose: 2.5Meters
● Test Oil:Mineral Oil or Baby Oil(oil not include)
● Multi Protections:Oil Outlet, Over-Heat and Over-Load Protection
● Machine Size:13cm x 8.5cm x 18.5cm
● Package Weight: 2.3kg/5 lb

Packing List  
1* S3000 Main Unit
1* Power Cord
1* Smoke Delivery Hose
1* Intake Bladder
1* Intake Bladder Replacement Rubber
1* Cone Adapter
1* Funnel
1* Hook
1* Manual Book  

Product structure introduction
Velcro Strap --For collection of the smoke delivery hose, and power cord before storage. 
Smoke Outlet Port -- While set up the unit, the Smoke Delivery Hose need to be mounted onto the Smoke Outlet .
Power Socket ---While set up the unit, the power cords need to plug into the power socket. 
State Indication and Air Control ---The <E - LED Indication> LED has two states.  RED: Power ON.  GREEN: Pressurized air production.  While power up the unit, the LED would turn RED.  Press <F - Air Control switch>, the <E - LED Indication> would turn GREEN, and the unit start to generate pressurized air.  Press <F - Air Control switch> again anytime, the <E - LED Indication> would turn RED, and the unit stops generating pressurized air. 
State Indication and Smoke Control ---The <G - LED Indication> LED has three states.  OFF: Smoke generation not started.  GREEN: Smoke generation.  RED: Overheat.  While not smoke the unit, the LED would be OFF.  Press <H - Smoke Control switch>, the <G - LED Indication> would turn GREEN, and the unit start to generate smoke.  Press <H - Smoke Control switch> again anytime, the <G - LED Indication> would turn OFF, and the unit stops generating smoke.  While the smoke generating chamber is overheat, for protection, the smoke generation would be halted and the <G - LED Indication> would turn RED and restart generating smoke while the smoke generating chamber cooled down, or you can switch it OFF by pressing <H - Smoke Control switch>
System Pressure Gauge --The Pressure Gauge displays the output pressure of the machine if block the smoke outlet port, otherwise it shows the real time pressure of the system been testing.  Pressure Decay Test: This gauge can also be used to determine if a leak exists by switching off the <F - Air Control> while the system is under pressure.  If the gauge holds the displayed pressure, there is no leakage.  If the displayed pressure starts drops, there is leakage in the system. 
Flow Meter -- The purpose of the flow meter is to provide a quick visual indication of the amount of air/smoke passing through the system being tested.  If the smoke nozzle is in a closed system, and there are no leaks in that system, the flow meter will read zero (ball at bottom of scale).  As the system is
filled with air or smoke, the ball in the flow meter will slowly fall to the bottom of the scale as the pressure in the system equalizes to the output pressure of the unit.  As the flow decreases, the output pressure will increase.  If the flow meter ball never falls to the bottom of the scale, there is leakage or air passing through the system.  It is not necessary to use smoke when using the flow meter to determine if a leak exists. 
Flow Dial--- In many cases excessive smoke exiting a leak may make it difficult to determine the exact location of the leak.  The purpose of the Flow Control Valve is to decrease the amount of smoke exiting a leak so that its position may be pinpointed without the masking effect of excessive smoke.  Turn clockwise to decrease flow, counterclockwise to increase flow.  This valve is also used to lock out the system under test and observe any pressure decay on the pressure gauge. 
Oil Level Gauge-- While set up the unit, smoke oil need to be filled into the unit, do not exceed the MAX line.  Check and confirm proper oil level periodically.  If the oil level is lower than the MIN line,the unit would need a refill.