Radiator Balancing Key

Radiator Lockshield Valve Key


BEWARE OF INFERIOR COPIES ON EBAY AND NOW EVEN ON TEMU!!


THIS IS THE ORIGINAL 3D PRINTED KEY WITH A UK GOVERNMENT REGISTERED DESIGN No 6526940 - THESE ARE OF SUPERIOR QUALITY AND MUCH, MUCH STRONGER!



!!Measure your valve first!!


You will receive 2 keys for each size you select!


Perfect size even in tight and confined spaces.


With over 50 different sizes available, the key you receive may not match EXACTLY what is in the photos. Colour shades, slightly different lengths, different surface finishes etc. It will, however, do exactly what it was designed to do - adjust your Lockshield valve! 


All my keys are checked with a plug gauge before posting to confirm the exact size.


"AF" is a general engineering term for a measurement "Across Flats"

You'll need this size along with the diameter of your spindle to make a choice from the drop-down

If you are stuck, get in touch.


Check out the diagram explaining this in the photos section.


IF YOU MEASURE CORRECTLY, THESE WILL FIT!!


YOU


MUST


MEASURE


CORRECTLY!!!!!!


Please, Please and Please again, it is YOUR responsibility to measure correctly. If I could come to you with measuring equipment, I would, but I can't.


I CANNOT determine a size from a photo unless a tape measure is included (Preferably measuring the tap!) Measure across the flats or square and take a photo. It must be directly above the tap and it must be in focus! Help me out here!!! 😂🤣🤣


If you order a square key...... Guess what, your key will be square!
Do not order a square key if you need one that is rectangular.
That is all I will say on that matter!

Please don't think I'm being rude here, this does actually happen!

3D Printed, this radiator balancing key fits the new "flat tab" lockshield valve nicely and makes adjusting to balance your radiators much MUCH easier! I've also added a "Square" type key that will fit all square valves listed.



NOTE :- This will NOT free up seized lockshield valves!! It is very strong but is not designed to free up anything that is seized! If your tap is seized, replace it before using this tool!


Once you have measured your valve carefully and selected the corresponding size from the drop-down to suit, this tool will fit the tab on your chosen size valves.


If the size you need is not listed, get in touch!


I can do it for you.


Simply measure your tab width and select your size from the dropdown. You MUST measure your valve though - I cannot do it from here!! Select your quantity and I'll get them sent out to you.



If you need a size not listed - get in touch!!!!!



You will get your keys in whatever colour I have running on the machine at the time.

Normally orange, yellow, green or white. If you need a specific colour, let me know, I'll use it if I have it.



NOTE :- This will NOT free up seized lockshield valves!! It is very strong but is not designed to free up anything that is seized! If your tap is seized, replace it before using this tool!



My aim is for you to be 100% satisfied.


You will receive 2 keys in whatever size you select. Go for multiples to save on postage but don't forget to add to basket first then checkout at the end when you've finished your selection!


If you are not completely satisfied with your purchase please do not hesitate to contact me; I will do my very best to resolve any issues. Please, please, please - it is YOUR responsibility to order the correct size key! I can not tell you what size your key is by looking at a photo of your valve! YOU need to measure and confirm.


All my keys are checked with a plug gauge before posting.