All modifications must be installed by licensed mechanics and in compliance with your local modification regulations
Fitment;
About the air suspension kit
- for Ram 1500 STANDARD 4WD 2019-2026
- for Dodge Ram 1500 STANDARD 4WD 2019-2026
- Note: Not fit for factory air. Not fit for 2019 Classic model and TRX model.
About the air spring controller kit
- UNIVERSAL FIT FOR MOST 1/2, 3/4 AND 1 TON PICKUPS AND VANS
- For Dodge ram 1500 2500 3500
- For Chevy Siverado 1500 2500 3500
- For GMC Sirra 1500 2500 3500
- For Ford F150 F250 F350
- For Toyota Tundra Tacoma
Feature:
About the air suspension kit
- 1、Stress Test Over 5,000,000 Times: Durable and Safe
- 2、Burst Pressure≥2.0MPa: High Compressive Strength and Less Noise
- 3、24 Hours Air Tightness Test ≤ 0.02MPa: 100% Air Tightness Guarantee
- 4、Temperature Range ≥ -40℃/ ≤ 70℃: Premium Natural Rubber Material
- 5、Use high-quality steel with high load-bearing capacity and long life.
- 6、Excellent and practical bolt-on installation.
- 7、Safe carrying capacity and stability
- 8、Restore the original ride height and improve ride quality
- 9、Ensure our driving comfort and reduce tire wear.
About the air spring controller kit
- 1、Allows you to monitor and adjust the air pressure sensor: rotate clockwise to increase values and counterclockwise to decrease.
- 2、Performs well for light-duty or medium-duty applications and for occasional hauling or towing.
- 3、Includes onboard air compressor, single-gauge dash panel, air lines and hardware.
- 4、Compatible with any brand of air spring.
- 5、Single-path controls let you adjust 1 pair of air springs.
- 6、Strict quality inspection to ensure long-term use without damage
- 7、Maximum air pressure: 100 psi.
- 8、Recommended working pressure:5-70 PSI
- 9、Wire harness has flame retardant properties.
- 10、The air compressor has quality assurance.
- 11、The air compressor has a waterproof casing.
- 12、The minimum pressure level is typically set at 5 psi and can be manually adjusted to maintain air pressure above the minimum level
- 13、Dacromet is a novel surface treatment technology with superior corrosion resistance, absence of hydrogen embrittlement, high heat resistance, excellent adhesion, and penetration compared to traditional plating processes.
Specification:
About the air suspension kit
- Condition: Brand New
- Drilling Required: NO
- Minimum PSI: 10 PSI
- Maximum PSI: 100PSI
- Internal Jounce Bumper included: Yes
- Placement on Vehicle: Rear left and right
- Package Length, width and height: 360*310*250mm
- Package Wight: 13.94Kg
- Load capacity: Up to 5000 LBS
- Design height: 180mm
- Stroke: 100mm
- Max. Extended: 200mm
- Min. Compressed: 100mm
Package Includes:
- 2x Heavy Duty Double Bellow Air Ride Suspension bags
- 6x Upper and lower mounting brackets
- Includes All Brackets & Hardware Needed to Install
Notice:
- We Recommend Professional Installation
OTHER ITEMS
>>you might also like
-
New Air Brake Compressor Assembly for Detroit Diesel DD15 2011 and newer
-
Fog Light for Ford F-250 F-350 F-450 F-550 Super Duty 2011-16 BC3Z15200A Set
-
Electronic Throttle Body Assembly for Ford Escape L4 1.6L S20169 977352 2013-16
-
2x Front Coil over Top Hats For Subaru Impreza WRX GDB 04 Camber Plate 02-07
-
2HP Air Compressor Motor 3 Phase 3450RPM 56CFrame 5/8" Diameter 1.88" Length
-
24 Level Damper Adjustable Coilovers For Honda Accord 1998-2002 Lowering Kit
-
Engine Motor Mount Kit For Honda Odyssey 3.5L V6 2014-2017 AUTO Trans A4575EL
-
8x Front&Rear Ceramic Brake Pads Kit for Subaru Forester Impreza Legacy Outback
-
Pair Rear Air Suspension Spring Bellows Bag for Range Rover 2003 2004 -2012 L322
-
2x CV Axle Shaft Assembly For Honda CR-V 2007 2008-2014 Front Left & Right 2.4L
-
AC Compressor w/Clutch For Chevrolet Silverado Express GMC Sierra Savana 2000-19
-
Electrical Throttle Body Valve For Volkswagen Beetle Golf Jetta Seat Ibiza 2.0L
