Fluke 199C ScopeMeter 200MHz 2.5GS/s Dual Input Handheld Oscilloscope w Probes
Item Condition
[Guaranteed] Arrived in working condition from a development institute or research center. Important: the internal rechargeable battery pack is worn out - the unit shuts down shortly after start-up on battery, so it must be operated with the supplied AC charger/adapter (a replacement battery pack is recommended).
[Guaranteed] Arrived in working condition from a development institute or research center.
We do not perform calibration, so we cannot guarantee the accuracy and precision of the unit within the calibration period.
Please purchase this item with the understanding that it is a used item.
Cosmetically the unit shows light scratches and dirt from normal field use, but there are no cracks or missing parts, and the protective holster, tilt stand and hand strap are all present. There is an inventory sticker and adhesive residue on the rear case. Important: the internal rechargeable battery pack is worn out - the unit shuts down shortly after start-up on battery, so it must be operated with the supplied AC charger/adapter (a replacement battery pack is recommended).
Operation Check
Powered on and tested with the supplied AC adapter (battery pack NG). Display is clear with no dead pixels or color unevenness. All keys (F1-F4, arrow keys, mode keys) respond correctly. Input A and Input B were each checked separately with a 1 kHz sine wave from a function generator - AUTO SET works and the waveforms are stable. Meter functions verified: DCV 1.508 V on an AA cell, ACV 5.95 V (consistent with a 3 Vrms source into high impedance), resistance 2.198 kohm on a 2.2 kohm resistor, and continuity buzzer sounds. Triggering locks stably on source A with rising/falling slope selection. TrendPlot, REPLAY, ZOOM (x2), CURSOR (delta 200 mV / 376.0 us) and SAVE/RECALL (saved to memory 1 and recalled successfully) all function. Not verified: Mathematics function and probe calibration menu (not located in the menu during testing) and high-frequency performance above roughly 1-10 MHz.
Included Items
Main unit with protective holster, tilt stand and hand strap. VPS200-G 10:1 probe set, gray (opened, unused). One 10:1 probe, red (opened, used). Red and black test leads with hook clips, alligator clips and ground lead. BC190/806 battery charger / power adapter (DC 17.8 V 840 mA) with 3-prong to 2-prong conversion plug. USB optically isolated interface cable Rev. II. FlukeView SW90W CD-ROM, USB driver CD and 3.5 inch floppy disk. Getting Started documentation (190 Series). Accessory content is equivalent to the -S kit configuration.
Please check the photos for the included accessories.
Product Info
The Fluke 199C ScopeMeter is a high-performance handheld digital oscilloscope from the Fluke 190C Series, offering 200 MHz bandwidth, up to 2.5 GS/s real-time sampling and deep memory of up to 27,500 points per input in ScopeRecord mode. It features two fully isolated scope inputs plus a separate DMM input, a color display, Connect-and-View automatic triggering, Digital Persistence for analyzing dynamic waveforms, automatic capture and replay of 100 screens, TrendPlot paperless recording for up to 22 days, waveform reference with pass/fail testing and a Vpwm function for motor drives and inverters. Rated 1000 V CAT II / 600 V CAT III, it is designed for field service, industrial maintenance and R and D work where bench-class scope performance is needed in a portable instrument.
Specifications
| Brand | FLUKE |
|---|---|
| MPN | 199C |
| Model | 199C |
| Type | Handheld Digital Oscilloscope / ScopeMeter Test Tool |
| Bandwidth | 200 MHz |
| Maximum Sampling Rate | 2.5 GS/s |
| Number of Channels | 2 scope inputs plus 1 DMM input (isolated) |
| Record Length | Up to 27500 points per input (ScopeRecord mode) |
| Input Sensitivity | 2 mV/div to 100 V/div |
| Display | Color LCD |
| Safety Rating | 1000 V CAT II / 600 V CAT III |
| Country of Origin | Netherlands |
We ship worldwide from Japan by DHL / FedEx express with a tracking number on every order.
- Orders are dispatched Monday to Friday. Weekends and Japanese public holidays are not available because the carriers are closed.
- We can only ship to the address registered on eBay. If you need a different address, please update it on eBay before ordering.
- Every item is professionally packed with double-wall boxes and cushioning. Sensitive equipment is packed in anti-static material.
- We do not mark merchandise values below value or mark items as gifts. Japanese, U.S. and international regulations prohibit this.
For buyers in the United States: This item is shipped with all duties prepaid (DDP). The applicable U.S. import tariff is already included in the item price — you will not be charged any additional duties or fees upon delivery.
For buyers outside the United States: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Important - if a DDU shipment is returned to us: When an item ships with duties unpaid (DDU), the carrier will contact you to collect import charges and any clearance documents required. Please respond promptly. If the shipment cannot be delivered and is returned to us because import charges were left unpaid, or because the carrier's requests went unanswered, eBay's Money Back Guarantee does not cover an order that could not be delivered for these reasons. In that case we will refund the item price once the returned item reaches us, less the actual round-trip shipping and any return or customs charges billed to us by the carrier (at cost, documented). Please make sure you are able to receive the shipment before buying.
Returns are accepted under the return policy shown at the top of this listing, and every order is covered by eBay Money Back Guarantee.
- If anything is wrong with your order, please message us first — we answer every message and will work with you until it is resolved.
- Any damage caused in transit should be reported within 3 days of delivery, with photos of the item and the outer box.
- Returned items must include all accessories and the original packaging.
We are a Japanese company specialising in used equipment sourced within Japan. Every unit is received, inspected and photographed by our own team in Niigata before it is listed — the photos in this listing are of the actual item you will receive.
Japanese equipment is typically kept in careful condition, and we describe exactly what we find, including any faults. If you have a question about this item or are looking for something we do not currently list, please feel free to contact us.
Inspected In-House
Checked and photographed by our own technicians before listing. What we find is what we write.
Packed for Transit
Double-wall boxes, cushioning and anti-static material for sensitive equipment.
Tracked Worldwide
DHL / FedEx express from Japan with a tracking number on every single order.