Origianl DJI Power 140W GaN Charger With 1m USB-C Digital Display Charging Cable

Model

CN: CDT01-CN

Net weight : about 245 grams


size：
 (folding): length 68.3 mm, width 32.2 mm, height 64 mm

The size data will vary due to different batches of materials and other reasons. Please refer to the physical product.

Number of ports

USB-C x 2

USB-A × 1

Power density：1.00 W/cm³

Plug type

Chinese standard, American and Japanese standard: folding plug design


Working environment temperature：0℃ to 25℃

Input specifications

Exchange input：AC power 100 volts to 240 volts, 50/60 Hz, maximum current 2 amps

The actual exchange input data varies from country to country or region.

Output specifications

Total output：140 W

USB-C output

5 volts, 3 A

9 volts, 5 A

12 volts, 5 A

15 volts, 5 A

20 volts, 5 A

28 volts, 5 A

Maximum output of 140 watts

USB-A output

5 volts, 3 A

9 volts, 3 A

12 volts, 2.25 A

11 volts, 3 A

Maximum output of 33 A

Output power distribution

In the case of 140 A full load output:

Single-port output:

 The maximum output power of USB-C1/C2 single port is 140 W

• The maximum output power of USB-A single port is 33 W

Dual-port output:

• USB-C1 + USB-C2: 100 W + 35 W, 35 W + 100 W, 65 W + 65 W

• USB-C1/C2 + USB-A: 100 W + 33 W

Three-port output:

• Intelligent dynamic distribution, the total does not exceed 140 watts

• USB-C1 + USB-C2 + USB-A: 80 W + 35 W + 22 W, 35 W + 80 W + 22 W, 65 + 50 W + 22 W

When multi-port output and powering DJI devices, the charger supports dynamic power distribution and gives priority to power to the connected DJI devices. This priority power supply function is only applicable to some DJI models and must be connected to the USB-C1 or USB-C2 interface with the DJI Power 7A USB-C digital charging cable. For details of specific support devices, please refer to the FAQ page of the official website. When the electrical device is not connected, it is recommended to unplug the charging cable to avoid limiting the maximum charging power of other interfaces. In addition, the charger has an over-temperature protection function, which will automatically reduce the output power when the output is fully loaded and the temperature reaches the safety threshold.

Digital display charging cable

Model

CDX01-GB-1M0

CDX01-GB-1M8

Extent

1 meter / 1.8 meters

Thread size

Length 27 mm, width 11.5 mm, height 7.6 mm

The size data will vary due to different batches of materials and other reasons. Please refer to the physical product.

Screen type

OLED

Interface type

USB-C to USB-C

The maximum load-bearing current

7 A

Maximum output power

240 W