Model UN-2 butt welding machine is a new type of portable resistance welding machine. The whole machine has the characteristics of compact and reasonable structure, excellent performance, safety and reliability, simple and convenient operation, fast welding, firm welding junction, strong tensile resistance, etc. After years of use by many manufacturers, it has received good feedback and is the best equipment for welding band saw blades or other sheets!
Model: UN-2
Voltage: 220V
Frequency: 50Hz
Power: 2KW
Specification: 240 * 150 * 320mm
Maximum welding width: 16mm (maximum 18mm width)
2. Grind the tempering saw blade smoothly, and then place the saw blade on the chuck for secondary tempering. When pressing the tempering switch, pay attention to whether the current at the tempering position is too large or the pressing time is too long. In general, it is appropriate to see the welding place gradually black, and it is best to see the fire light as small dark red.
3. In order to prolong the service life of the transformer, it is recommended that no more than 5 saw blades be continuously welded, and the welding can be continued after about 30 minutes of standby. Overload use is strictly prohibited.
4. When using the saw blade cutter, please do not cut the position with welded junction. When the cutter is not sharp, it can be removed for grinding. The cutter can grind 2mm at most.











