Product Description
WoodZone Dual Purpose Wood Preservative Concentrate is a professional-strength timber treatment designed to protect wood against both wood-boring insects and wood-destroying fungi. Using advanced micro-emulsion technology, this highly concentrated formula delivers superior penetration compared to traditional water-based preservative systems, providing long-lasting protection for internal and external timber.
Supplied as a compact 400g concentrate, each container makes up to 25 litres of ready-to-use preservative, reducing storage requirements, transport costs, and plastic waste. The solvent-free formulation is virtually odourless, non-flammable, and suitable for a wide range of timber preservation projects.
Special Features
-
Dual-purpose protection
- treats both wood-boring insects and fungal decay
-
Super concentrate formula
- 400g makes up to 25 litres of treatment solution
-
Advanced micro-emulsion technology
- improved timber penetration
-
Protects against woodworm and termites
- long-term insect control
-
Effective against dry rot and wet rot fungi
- prevents timber decay
-
Virtually odour-free
- suitable for indoor use
-
Fully solvent-free
- contains no VOCs
-
Non-flammable formulation
- safer handling and storage
-
Quick re-entry time
- treated areas can be re-entered after 1 hour
-
HSE Approved No. 10445
- professional-grade timber preservation
Typical Applications
-
Roof timbers
-
Floor joists and structural timber
-
Loft spaces and roof voids
-
Timber fencing
-
Cladding and external timber
-
Woodworm treatment projects
-
Preventative timber preservation
-
Rot treatment and protection
Note:
Suitable for internal and external timber that is not in direct ground contact or permanently submerged in water.
Protection Against
-
Common Furniture Beetle (Woodworm)
-
Deathwatch Beetle
-
House Longhorn Beetle
-
Termites
-
Dry Rot (Serpula lacrymans)
-
Wet Rot Fungi
-
General Wood-Destroying Fungi
How It Works
The advanced micro-emulsion technology allows active ingredients to penetrate deeply into timber fibres where they provide long-term protection against insect attack and fungal decay.
Unlike traditional emulsified wood preservatives, the formulation forms a stable treatment solution that delivers enhanced penetration and more effective distribution throughout the timber structure
Mixing Instructions
-
Empty one 400g container into a suitable mixing vessel
-
Add clean water to make a total volume of 25 litres
-
Mix thoroughly before application
-
Prepared solution can be stored for up to 6 months if sealed correctly
Application
-
Apply only when temperatures are above 5°C
-
Ensure timber is reasonably dry before treatment
-
Remove paint, varnish, bark, and surface coatings before application
-
Apply by brush or low-pressure spray
-
Apply to refusal at approximately 1 litre per 3-4m²
-
Alternatively, timber may be immersed for up to 3 minutes
Coverage Guide
-
Brush or Spray Application: Approx. 3-4m² per litre
-
25 Litres Ready-to-Use Solution: Approx. 75-100m² coverage
Specification
-
Concentrate Size:
400g
-
Ready-to-Use Yield:
25 Litres
-
Application Temperature:
Above 5°C
-
Re-Entry Time:
1 Hour
-
VOC Content:
None
-
Flammability:
Non-Flammable
-
HSE Approval:
No. 10445
-
Shelf Life (Concentrate):
Up to 4 Years
-
Shelf Life (Diluted):
Up to 6 Months
-
Health & Safety:
Refer to the BPI Safety Data Sheet before use.