Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Front Rear Brake Rotor + Brake Caliper + Ceramic Brake Pad Kit
Application:
for Lexus ES350 2007-2011 All Engine
for Lexus ES350 2012 All Engine; Production Before 09/2011
for Toyota Avalon 2008-2011 All Engine
for Toyota Camry 2007-2009 All Engine
for Toyota Camry 2010 All Engine; Exc. Japan Built
for Toyota Camry 2011 All Engine; Before 12/2010, Japan/USA Built
OE/Part number:
| ● Front Brake Rotors: | S-31434,S31434,31434 |
| ● Rear Brake Rotors: | 31433,S-31433,S31433 |
| ● Front Brake Pads: | P-1293,P1293,1293,D1293,P-1222,P1222,1222,D1222 |
| ● Rear Brake Pads: | D1212,P1212,P-1212,1212 |
| ● Front Brake Caliper: | Driver Side(Left): 19-B3128,19-P3128,19B3128,19P3128,4775006220, 4775007071,4775033340,47750-06220,47750-07071,47750-33340,4775033361 Passenger Side(Right): 19-B3129,19-P3129,19B3129,19P3129,4773006220,4773007071,4773033340,47730-06220,47730-07071,47730-33340,4773033361 |
| ● Rear Brake Caliper: | Driver Side(Left): 19-B3131,19-P3131,19B3131,19P3131,SLB20157,SL20157,4785033211,47850-33210,4785033210,4785006052,4785006050 Passenger Side(Right): 19-B3130,19-P3130,19B3130,19P3130,SLB20156,SL20156,4783033211,47830-33210,4783033210,4783006052,4783006050,4782133211 |
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Specification:
- Brake Caliper
| Placement on Vehicle: | Front Side | Rear Side |
| Condition: | New | New |
| Piston Material: | Steel | Steel |
| Brake Caliper Piston Diameter: | 2.50 in / 63.50mm | 1.5 in. / 38 mm |
| Brake Caliper Piston Count: | 1 Pistion | 1 Pistion |
| Brake Caliper Inlet Port Size | M10 × 1.0 | M10 x 1. 0 |
| Brake Caliper Bleeder Port Size: | M7 × 1.0 | M7 × 1.0 |
| Installation Hardware Included: | Yes | Yes |
| Bracket: | without | with |
- Brake Rotors
| Placement on Vehicle | Front Side | Rear Side |
| Material | G3000 | G3000 Iron Alloy |
| Solid Or Vented Type Rotor | Vented | Solid |
| Rust Resistant Coating | Anti-rust oil treatment | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional | Directional |
| ABS Tone Ring Included | No | No |
| Bearings Included | No | No |
| Mounting Bolt Hole Quantity | 5+2 | 5+2+1 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 | 114.3 |
| Outside Diameter(mm) | 296mm / 11.65 in | 11.06 in. / 281mm |
| Overall Height(mm) | 49.2 | 66.8 |
| Nominal Thickness(mm) | 28 | 10 |
- Brake Pads
| Placement on Vehicle | Front Side | Rear Side |
| Fitment | Direct Replacement | Direct Replacement |
| Backing Material | Steel | Steel |
| Pad Material | Semi Metallic | NAO Ceramic |
| Pad Shims Included | Yes | Yes |
| Mounting Hardware Included | Yes | Yes |
| Mounting bolt | No | No |
| Lubricant Included | Yes | Yes |
| Pad Wear Sensor Included | Yes | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 157.7 (±0.3) | 96.75 (±0.3) |
| Inner Pad Height(mm) | 57.05 (±0.3) | 49 (±0.3) |
| Inner Pad Thickness(mm) | 17 (-0.5) | 14.8 (-0.5) |
| Outer Pad Width(mm) | 157.7 (±0.3) | 96.75 (±0.3) |
| Outer Pad Height(mm) | 57.05 (±0.3) | 49 (±0.3) |
| Outer Pad Thickness(mm) | 17 (-0.5) | 14.8 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
4x Front & Rear Drilled and Slotted Disc Brake Rotor
8x Front & Rear Ceramic Brake Pads w/Hardware
4x Front & Rear Brake Caliper
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.
OTHER ITEMS
>>you might also like
-
Intermediate Steering Shaft for GMC Sierra 1500 Yukon 09-12 XL 1500 425-184 new
-
34x Head Bolts for Chevy SBC 350 283 302 305 307 327 383 400 134-3601 98493201
-
4x Suspension Kit Front Strut Spring Assembly For Nissan Altima 2013-2018 172901
-
3" Front Lowering Shocks for Ford F150 & F100 2WD 1980-1996 Shock Absorber
-
Main Blend Door Actuator For Chevy Silverado GMC Sierra 1500 2500 1999-2002 Mode
-
Cooling Fan for BMW X5 E70 X6 E71 L6 3.0L Petrol 2008 2009-2014 17427616102
-
8x Front Lower Control Arms Kit for 2010-2013 Hyundai Tucson Kia Sportage
-
Engine Oil Pump for Lexus ES350/GS350/IS350 2006-2018 OPTO49 OP968
-
Twin Turbocharger for Ford F150 Pickup 2013-2016 3.5L V6 53039880469/0470
-
Front Right Exterior Door Handle for Toyota Corolla Sedan 4-Door 1998-2002
-
6 Pack LF14000NN Oil Filter 57746XD LF14000NN Fit for Cummins ISX 4367100
-
Passenger Side Mirror for Ford F250 F350 Super Duty 2003-07 Signal Light
