Dell PowerEdge OEMR XL R740xd | 2x Xeon Gold 6126 | 256GB RAM | 2x SSD | H730P | Rails
Zum Verkauf steht ein leistungsstarker Dell EMC PowerEdge OEMR XL R740xd Rack-Server im 2U-Format.
Der Server ist mit zwei Intel Xeon Gold 6126 Prozessoren, insgesamt 256 GB DDR4 ECC-Arbeitsspeicher, zwei SATA-SSDs sowie einem Dell PERC H730P RAID-Controller ausgestattet.
Mit insgesamt 24 Prozessorkernen und 48 Threads eignet sich das System ideal für Virtualisierung, Datenverarbeitung, Datenbankanwendungen, Storage- und Backup-Lösungen, Entwicklungsumgebungen sowie anspruchsvolle Server- und Rechenzentrumsaufgaben.
Gemäss der Dell-iDRAC-Systemübersicht arbeitet das System fehlerfrei. Auch der Speicherstatus wird als fehlerfrei angezeigt.
Hersteller: Dell EMC
Modell: PowerEdge OEMR XL R740xd
Service-Tag: B89xxxxx
Bauform: 2U Rack-Server
Prozessoren: 2 × Intel Xeon Gold 6126
Taktfrequenz: 2,60 GHz
Kerne pro Prozessor: 12
Threads pro Prozessor: 24
Gesamtanzahl Kerne: 24
Gesamtanzahl Threads: 48
Rail Kit: Im Lieferumfang enthalten
Beide Intel Xeon Gold 6126 Prozessoren werden vom System erkannt und verfügen jeweils über zwölf Kerne.
Arbeitsspeicher: 256 GB DDR4 ECC RAM
RAM-Bestückung: 8 × 32 GB
Speichertyp: DDR4 Dual-Rank
Speichergeschwindigkeit: 2666 MHz
Verfügbare Speichersteckplätze: 24
Belegte Speichersteckplätze: 8
Fehlerkorrektur: Multi-Bit ECC
Maximal unterstützte Kapazität: 3’072 GB
Der Hardwarebericht bestätigt eine installierte Kapazität von 256 GB. Alle acht verbauten Speichermodule verfügen über jeweils 32 GB.
Der Server enthält zwei SATA-SSDs:
2 × 120 GB SATA SSD
Gesamtkapazität: ca. 240GB
Datenträgerstatus: Bereit
Verbleibende eingestufte Schreibbeständigkeit: jeweils 99 %
Die beiden SSDs werden im Systembericht als betriebsbereit mit jeweils 99 Prozent verbleibender Schreibbeständigkeit aufgeführt.
RAID-Controller: Dell PERC H730P
Controller mit Batterie: Ja
Installationsort: PCIe-Steckplatz 6
PERC-Firmware: Version 25.5.5.0005
Backplane: BP14G+EXP
Der PERC H730P Controller wird im PCI-Inventar des Servers aufgeführt.
Netzwerkadapter: Intel 2P X710 / 2P I350 rNDC
10-Gigabit-Ethernet: 2 Ports
1-Gigabit-Ethernet: 2 Ports
Netzwerkports insgesamt: 4
Netzteile: 2 × Dell 1100 Watt
Netzteiltyp: AC
Ausführung: Redundant und Hot-Plug-fähig
Dell-Teilenummer: 0CMPGMA01
Beide 1100-Watt-Netzteile werden im Hardwarebericht als vorhanden angezeigt.
Der Server verfügt über sechs High-Performance-Systemlüfter. Zum Zeitpunkt der Systemauslesung liefen die Lüfter mit ungefähr 32 Prozent ihrer maximalen Leistung.
Remote-Management: Dell iDRAC
iDRAC-Version: 3.21.21.21
Lifecycle Controller: Version 3.21.21.21
BIOS-Version: 1.4.8
Backplane-Firmware: Version 2.41
Der Server befindet sich in einem gebrauchten Zustand und kann leichte Gebrauchs-, Lager- und Montagespuren aufweisen, wie sie bei professioneller Rechenzentrumshardware üblich sind.
Das System wurde über Dell iDRAC ausgelesen. Gemäss der Systemübersicht arbeitet der Server fehlerfrei. Die beiden SSDs werden als betriebsbereit angezeigt.
1 × Dell EMC PowerEdge OEMR XL R740xd
2 × Intel Xeon Gold 6126
256 GB DDR4 ECC RAM
1 × Dell PERC H730P RAID-Controller mit Batterie
2 × 120GB SATA SSD
1 × Intel 2P X710 / 2P I350 rNDC Netzwerkadapter
2 × Dell 1100-Watt-Hot-Plug-Netzteile
1 × passendes Dell Rail Kit für die Rack-Montage
Der genaue Lieferumfang richtet sich nach der Artikelbeschreibung und den Produktbildern.
Kein Betriebssystem
Keine Software oder Lizenzen
Keine zusätzlichen Festplatten oder SSDs
Keine zusätzlichen Laufwerksträger
Keine Netzwerk- oder Stromkabel
Kein weiteres Zubehör
Bitte prüfen Sie vor dem Kauf, ob die angebotene Konfiguration für Ihren vorgesehenen Einsatzzweck geeignet ist.
Der Server wird sorgfältig und transportsicher verpackt. Massgebend für den genauen Lieferumfang sind die Artikelbeschreibung und die Produktbilder.
For sale is a powerful Dell EMC PowerEdge OEMR XL R740xd rack server in a 2U form factor.
The server is equipped with two Intel Xeon Gold 6126 processors, 256 GB of DDR4 ECC memory, two SATA SSDs and a Dell PERC H730P RAID controller.
With a total of 24 processor cores and 48 threads, this system is ideal for virtualization, data processing, database applications, storage and backup solutions, development environments and demanding server or data-centre workloads.
According to the Dell iDRAC system overview, the system is operating without errors. The memory status is also shown as error-free.
Manufacturer: Dell EMC
Model: PowerEdge OEMR XL R740xd
Service Tag: B89xxxxx
Form factor: 2U rack server
Processors: 2 × Intel Xeon Gold 6126
Clock speed: 2.60 GHz
Cores per processor: 12
Threads per processor: 24
Total processor cores: 24
Total threads: 48
Rail kit: Included
Both Intel Xeon Gold 6126 processors are detected by the system and provide twelve cores each.
Memory: 256 GB DDR4 ECC RAM
Memory configuration: 8 × 32 GB
Memory type: DDR4 Dual-Rank
Memory speed: 2666 MHz
Available memory slots: 24
Used memory slots: 8
Error correction: Multi-bit ECC
Maximum supported capacity: 3,072 GB
The hardware report confirms a total installed capacity of 256 GB. All eight installed memory modules have a capacity of 32 GB each.
The server includes two SATA SSDs:
2 × 120GB SATA SSD
Total capacity: Approximately 240GB
Drive status: Ready
Remaining rated write endurance: 99% each
Both SSDs are shown as ready, with 99 percent remaining rated write endurance.
RAID controller: Dell PERC H730P
Battery-backed controller: Yes
Installed in: PCIe slot 6
PERC firmware: Version 25.5.5.0005
Backplane: BP14G+EXP
The PERC H730P controller is listed in the server’s PCI inventory.
Network adapter: Intel 2P X710 / 2P I350 rNDC
10 Gigabit Ethernet: 2 ports
1 Gigabit Ethernet: 2 ports
Total network ports: 4
Power supplies: 2 × Dell 1100 W
Power-supply type: AC
Configuration: Redundant and hot-plug capable
Dell part number: 0CMPGMA01
Both 1100 W power supplies are detected as present in the hardware report.
The server is equipped with six high-performance system fans. At the time of the system report, the fans were operating at approximately 32 percent of their maximum speed.
Remote management: Dell iDRAC
iDRAC version: 3.21.21.21
Lifecycle Controller: Version 3.21.21.21
BIOS version: 1.4.8
Backplane firmware: Version 2.41
The server is in used condition and may show minor signs of use, storage and rack installation that are typical for professional data-centre equipment.
The system was checked through Dell iDRAC. According to the system overview, the server is operating without errors. Both SSDs are shown as ready.
1 × Dell EMC PowerEdge OEMR XL R740xd
2 × Intel Xeon Gold 6126
256 GB DDR4 ECC RAM
1 × Dell PERC H730P battery-backed RAID controller
2 × 120GB SATA SSD
1 × Intel 2P X710 / 2P I350 rNDC network adapter
2 × Dell 1100 W hot-plug power supplies
1 × compatible Dell rail kit for rack mounting
The exact scope of delivery is determined by the item description and product pictures.
No operating system
No software or licences
No additional hard drives or SSDs
No additional drive caddies
No network or power cables
No additional accessories
Please verify before purchasing that the offered configuration is suitable for your intended application.
The server will be carefully packed for safe transportation. The item description and product pictures determine the exact scope of delivery.
WE HAVE MASSIVE STOCK OF ALL DIFFERENT VENDOR PARTS AND SYSTEMS. PLEASE DO NOT HESITATE TO CONTACT US. IF WE HAVE WHAT YOU NEED, WE CAN THANK YOU THE LEVEL ON E-BAY FOR THANKS.
WE CAN ALSO KNOW YOU HOW TO CONTINUE. THE CND WORKS OVER 20 YEARS WITH HP / HPE PRODUCTS. HAVE ANY QUESTIONS CONTACT US.
YOU HAVE 30 DAYS WARRANTY ON USED/ REFURBISHED PARTS.
NO REFUNDS AFTER 30 CALENDAR DAYS
PAYMENTS:
We accept PayPal and Ebay payment. Payment is expected within 1-3 days of end of auction, if you have a problem, please contact us
SHIPPING:
We ship within 1-2 business days (Monday-Friday) of receiving payment. The buyer will receive the shipping number immediately after shipment. The shipping number is also stored on Ebay
TAX / Customs fees:
Duties on buyer's account
PICK-UP:
With an appointment, some items may be picked up from our Lokistic-Center. Contact us for pick-up arrangements.
CND AG has been providing trouble-free data-centre operations in consulting, planning, implementation and maintenance for decades. Based on this experience, our certified employees are able to develop the appropriate solutions and operating concepts for the requirements of every customer. Always in the foreground are factors such as efficiency, reliability and continuity.