Application
This product is suitable for home KTV, band/stage performances, campus activities, conferences, bars, music dining bars, recording studios, network anchoring, and other occasions.
Specification
Material: Metal
Color: Black
Process: Spray Painting
Style: Modern
Shape: Rectangle
Power Source: Corded Electric
Plug Type: US Standard
Voltage: 110V
Number of Channels: 12
Interface Type: USB
Control Mode: Manual
Maximum Input Level of Microphone:+ 24dBu
Maximum Input Level of the Line:+ 24dBu
Maximum Output Level: XLR Canon+26dBu
Main Level Meter: 10 Segment LED- 24dB to CLIP
Frequency Response: 20Hz to 30kHz+0.5dB
Maximum Power Input Power: 15W
Total Harmonic Distortion (THD+N):< 0.01% (Channel Input to Mix Output)
Crosstalk (1kHz): Pushing Off>85dB Between Channels>82dB
Noise (22Hz to 22kHz): Equivalent Input Noise -122dBu, Residual Output Noise<-90dBu
Mono/Stereo Channel EQ: High Frequency, Broom Type, +/- 15dB, 12kHz Low Frequency, Broom Type, +/-15dB, 80kHz High-Medium Frequency, Peak Valley Type, +/- 15dB 2.5kHz
Mono Channel: XLR Balanced, 2-Pin Hot End, 2K ohm Sensitivity -60 to+14dBu
TRS Balanced, Tip Hot End 10K ohm Sensitivity -40 to+14dBu
XLR Phantom Power Supply+48V
2-Track Return: RCA Lotus Seat, Unbalanced, 4K ohm- 2dBu
2-Track Transmission: RCA Lotus Seat, Unbalanced< 75 Ohm,- 2 dBu
L/R Output: XLR, Balanced, Pointed Hot End< 75ohm+4dBu, Maximum+22dBu
FX/AUX Output: TRS, Unbalanced, Pointed Hot End< 75ohm，- 2dBu, Maximum+18dBu
Headset: TRS, Tip L, Ring R, Recommended 30 to 600ohm Earphones
Product Size: 516*340*37mm/20.31*13.39*1.46in
Package Size: 54*9*41cm/21.26*3.54*16.14in
Gross Weight: 6.4kg/ 14.11 lbs
Net Weight: 6.08kg/13.4 lbs
Package Included
1* Audio Mixer
1* Power Cable
Notes
- Please check the size carefully before ordering.
- Please make sure that all equipment (e.g. microphones, musical instruments, amplifiers, speakers, etc.) is properly and securely connected to the mixer to avoid noise or signal loss due to improper connection. This product does not contain any other equipment except the mixer.
- Please use a stable power supply to power the mixer, preferably with a power purifier or uninterruptible power supply (not included) to prevent damage to the equipment caused by power fluctuations or sudden power outages.
- Please ensure that the mixer and related equipment are well grounded to minimize the risk of electrostatic interference and leakage, and to protect the safety of equipment and personnel.
- Please clean the surface and knobs of the mixer on a regular basis, wipe them gently with a clean, soft cloth, and avoid the use of detergents containing corrosive ingredients.
- Please note that the monitoring volume should be adjusted to a moderate level to avoid hearing damage caused by being in a high volume environment for a long time.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
